So I am cleaning up the wiring on my bike and when I pulled the plug from the boost sensor 2 of the wires were broken.
so... the book doesnt show their positions and it may not matter but I want to be certain so what I need please and thank you is someone to pull the plug thats attatched below the fuse block. Not the main plug lol just the 3 prong plug on too.
Then look at the wire side so the white with blue stripe is on the left. The wire on the right which is also vertical so 2 vertical on the bottom and horizontal on top. ie the single wire on top and the 2 wires on the bottom. The left should be white with blue like I said but what color is the top one and what color is the right on.
I know i could norrow it down if you told me only 1 color lol but I want to be certaiin.
thanks a bunch
I need a little help with the boost sensor wiring please.
-
- Learning My Moped
- Posts: 142
- Joined: Tue Sep 06, 2016 9:37 pm
- My Bike: Vs1400 and Warrior 1700
- Designer
- Joined a 1200cc Club
- Posts: 17671
- Joined: Tue Sep 16, 2014 8:34 am
- My Bike: Two 1400 Custom Made Choppers
Re: I need a little help with the boost sensor wiring please.
This is when a picture is worth a thousand words.
Could you snap some of the connectors at issue please?
Could you snap some of the connectors at issue please?
-
- Learning My Moped
- Posts: 142
- Joined: Tue Sep 06, 2016 9:37 pm
- My Bike: Vs1400 and Warrior 1700
Re: I need a little help with the boost sensor wiring please.
Got it
finally lol took all day betwenn 3 sires to get a picture of it from someone.
All fixed thanks
finally lol took all day betwenn 3 sires to get a picture of it from someone.
All fixed thanks
- Designer
- Joined a 1200cc Club
- Posts: 17671
- Joined: Tue Sep 16, 2014 8:34 am
- My Bike: Two 1400 Custom Made Choppers
Re: I need a little help with the boost sensor wiring please.
Glad to hear you have gotten what you needed. Did the Metal Terminal slip out of the Plastic connetor?
R U up-and-running again?
R U up-and-running again?
-
- Learning My Moped
- Posts: 142
- Joined: Tue Sep 06, 2016 9:37 pm
- My Bike: Vs1400 and Warrior 1700
Re: I need a little help with the boost sensor wiring please.
no 2 of the wires were broken off. so glad I went through the wiring before I buttoned it up and started it. Had 2 more plugs that needed replacing so I would have had q problem sooner than later..
I should be able to stqrt it now. Just dealing with the signals. the indicator is only coming on for 1 side. I will spend an hour max trying to find that before I give it up and not worry about it.
Oh yeah and I bought a couple of those preaaure activated banjo bolts for break light switches. have to install those and bleed the brakes.
Dont want her running before I have brakes, that would pull at the moral fibres lol
Then hopefully that delloro is set close.
Keeping fingers crossed.
I should be able to stqrt it now. Just dealing with the signals. the indicator is only coming on for 1 side. I will spend an hour max trying to find that before I give it up and not worry about it.
Oh yeah and I bought a couple of those preaaure activated banjo bolts for break light switches. have to install those and bleed the brakes.
Dont want her running before I have brakes, that would pull at the moral fibres lol
Then hopefully that delloro is set close.
Keeping fingers crossed.