Removing tank badges?
-
- Practicing Bicycling
- Posts: 26
- Joined: Thu Aug 25, 2022 5:02 pm
- My Bike: 2001 Intruder 1400
Removing tank badges?
Don't want to start a style debate, but has anybody removed the tank side badges? Are they just glued on? I use a magnetic tank bag with "ears" that go around the tank and the badges kind of get in the way. (I'm a little nervous on this topic because some years ago on a wooden boat forum I mentioned a hull modification I wanted to do and the classicists flamed the hell out of me. You'd have thought I suggested defacing the Lincoln Memorial.)
- hillsy v2
- Bike out of hock
- Posts: 3038
- Joined: Wed Jul 27, 2022 5:35 pm
- My Bike: Too many to list
Re: Removing tank badges?
You're pretty safe with suggesting mods to an Intruder - there's not too many purists here
Not 100% on the 1400 but the LC and Boulevards used a double sided tape. Warm up the badge with a hair dryer and it should come off a lot easier.
Not 100% on the 1400 but the LC and Boulevards used a double sided tape. Warm up the badge with a hair dryer and it should come off a lot easier.
- sgtcall
- LICENSE SUSPENDED!
- Posts: 2797
- Joined: Sun Apr 03, 2016 5:59 pm
- My Bike: Triumph Bonneville Speedmaster
- Location: Stranded in New Jersey
Re: Removing tank badges?
My 1400 was just double sided tape and the paint pattern continued under the plate. Depending on age and sun exposure you may have a slightly different shade under the plate. Pull some dental floss behind the plate and wipe the residue clean with WD40.
If you have any type of electrical issue, have your battery load tested before you do anything else. Any auto parts store will test it for free.
- Herb
- Joined a 1200cc Club
- Posts: 19277
- Joined: Sun Oct 26, 2014 9:28 pm
- My Bike: 1999 1400 intruder
Re: Removing tank badges?
My 99 also had double sided tape holding it on. I used a fine monofiliment fishing line to cut it off. Used some goof off to clean up the residue. There was very little difference in the paint color and once it was waxed you had to know the difference was there to see it.
Personally I have no problem with customization of a bike to make it fit the rider's style and use. I like to look at others ideas and copy those that work for me. I think that most of us think the same way.
Personally I have no problem with customization of a bike to make it fit the rider's style and use. I like to look at others ideas and copy those that work for me. I think that most of us think the same way.
I can't seem to win the lottery. I think I have used up all of my good luck riding motorcycles.
- sgtcall
- LICENSE SUSPENDED!
- Posts: 2797
- Joined: Sun Apr 03, 2016 5:59 pm
- My Bike: Triumph Bonneville Speedmaster
- Location: Stranded in New Jersey
Re: Removing tank badges?
By the way you can always put them back on if you want the original look again.
If you have any type of electrical issue, have your battery load tested before you do anything else. Any auto parts store will test it for free.
-
- Joined a 1100cc Club
- Posts: 5496
- Joined: Thu Dec 29, 2016 12:33 pm
- My Bike: VS800
Re: Removing tank badges?
+1 on the fishing line, you kind of use a sawing motion.
Badges, we don't need no stinking badges.
Badges, we don't need no stinking badges.
-
- Practicing Bicycling
- Posts: 26
- Joined: Thu Aug 25, 2022 5:02 pm
- My Bike: 2001 Intruder 1400
Re: Removing tank badges?
Thanks, guys. That's what I expected. I might find another place to slap the badges. Fork lowers? LOL
- Herb
- Joined a 1200cc Club
- Posts: 19277
- Joined: Sun Oct 26, 2014 9:28 pm
- My Bike: 1999 1400 intruder
Re: Removing tank badges?
I think mine are still in the spare parts box... Over 10 years.
I can't seem to win the lottery. I think I have used up all of my good luck riding motorcycles.
- sgtcall
- LICENSE SUSPENDED!
- Posts: 2797
- Joined: Sun Apr 03, 2016 5:59 pm
- My Bike: Triumph Bonneville Speedmaster
- Location: Stranded in New Jersey
Re: Removing tank badges?
I put some new double sided tape on them and stuck them on my garage wall.
If you have any type of electrical issue, have your battery load tested before you do anything else. Any auto parts store will test it for free.
- Herb
- Joined a 1200cc Club
- Posts: 19277
- Joined: Sun Oct 26, 2014 9:28 pm
- My Bike: 1999 1400 intruder
Re: Removing tank badges?
Good place for them.
I can't seem to win the lottery. I think I have used up all of my good luck riding motorcycles.
-
- Joined a 1100cc Club
- Posts: 5496
- Joined: Thu Dec 29, 2016 12:33 pm
- My Bike: VS800
Re: Removing tank badges?
I stuck mine on a prius.
- Herb
- Joined a 1200cc Club
- Posts: 19277
- Joined: Sun Oct 26, 2014 9:28 pm
- My Bike: 1999 1400 intruder
Re: Removing tank badges?
I can't seem to win the lottery. I think I have used up all of my good luck riding motorcycles.