First gear no throttle
Posted: Tue Sep 12, 2023 12:37 pm
Hi
Today i was wondering about one thing. On my VS1400 i cant run at first gearwithout adding some throttle. She idles fine at 1000rpms. Carbs are clean, AFR is good, sync is perfect. But no matter how smoothly i will let the clutch out she will stall without even slightest amount of throttle. And while slowly running when i close the throttle completely she will also stall.
I could do that without a problem with Boulevard C50, honda CB500, Suzuki SV650, yamaha MT07 and smaller bikes that i have ridden.
I could do that in all cars that i had.
I find it strange that such big engine wont have enough torque at idle rpms to just slowly move forward. I wonder if it is normal for that bike or maybe i should rise idle rpms a bit by opening the butterflys and it will be the same like a very small amount of throttle. I have KN drop ins so maybe the carbs a a little bit more closed at 1000rpm idle than with factory foam inserts.
Today i was wondering about one thing. On my VS1400 i cant run at first gearwithout adding some throttle. She idles fine at 1000rpms. Carbs are clean, AFR is good, sync is perfect. But no matter how smoothly i will let the clutch out she will stall without even slightest amount of throttle. And while slowly running when i close the throttle completely she will also stall.
I could do that without a problem with Boulevard C50, honda CB500, Suzuki SV650, yamaha MT07 and smaller bikes that i have ridden.
I could do that in all cars that i had.
I find it strange that such big engine wont have enough torque at idle rpms to just slowly move forward. I wonder if it is normal for that bike or maybe i should rise idle rpms a bit by opening the butterflys and it will be the same like a very small amount of throttle. I have KN drop ins so maybe the carbs a a little bit more closed at 1000rpm idle than with factory foam inserts.