Page 1 of 1
Decom control unit ?
Posted: Wed Dec 27, 2023 3:23 am
by PKOS
I have a 1987 1400 Intruder while trying to test if it was working[battery and ,tester] wires touched and cooked it ,need a new one ,but everywhere i have looked Says ,''No longer available ,No longer made''[ the part number is : 32910-24B10
C8D 27S-B
OMRON JAPAN
20X7D2
but later Models/Years have the part Number the same as :329-24B10 ,is there any real difference or are they all the same with this part number ? will it work on my year model
Thankyou
PKOS
Re: Decom control unit ?
Posted: Wed Dec 27, 2023 4:54 am
by hillsy v2
The 1500 decomp is different but I'm pretty sure all the 1400s were the same throughout the years.
Re: Decom control unit ?
Posted: Wed Dec 27, 2023 9:34 am
by Herb
If it is the same part number it will work.
Re: Decom control unit ?
Posted: Wed Dec 27, 2023 11:14 am
by sgtcall
In our DropBox there is a folder called Other Information that has the Decomp diagram. You can also pull a shop manual from the DropBox.
viewtopic.php?f=19&t=14168
It looks like Partzilla has the part but I am not sure if it changed with different years.
https://www.partzilla.com/product/suzuki/32910-24B10
Re: Decom control unit ?
Posted: Wed Dec 27, 2023 1:54 pm
by hillsy v2
Suzuki will often re-issue / remake a part and change the part number. The part is the same - it just "supersedes" the original.
Obviously if it has the original part number it is correct -but don't think a different part number is a dead end.
Re: Decom control unit ?
Posted: Thu Dec 28, 2023 11:38 am
by PKOS
Thanks everyone for the help and replies
Cheers