Can anyone recommend aftermarket risers that fit the triple tree? I have the triple tree that fits the wide OEM risers (the OEM risers that have a metal notch to keep the OEM bars from slipping - they're real thick fitting in the upper triple tree).
OR does anybody have experience shaving down that "notch" in the riser where the bar rests? I'm trying to fit some aftermarket handlebars and I don't want to drill holes in the bars (so that the notch fits into the bar).
Pleas let me know!!!
Aftermarket risers for the WIDE risers with the notch where the bar rests
-
- Learning My Moped
- Posts: 107
- Joined: Tue Jan 12, 2021 12:40 pm
- My Bike: 2002 1994 1994[2] 1997 vs800
-
- Learning My Moped
- Posts: 107
- Joined: Tue Jan 12, 2021 12:40 pm
- My Bike: 2002 1994 1994[2] 1997 vs800
Re: Aftermarket risers for the WIDE risers with the notch where the bar rests
searching ebay I saw VL800 (Volusia) risers -- they look like they might work. Does anybody know for sure?
- Designer
- Joined a 1200cc Club
- Posts: 17408
- Joined: Tue Sep 16, 2014 8:34 am
- My Bike: Two 1400 Custom Made Choppers
Re: Aftermarket risers for the WIDE risers with the notch where the bar rests
I can say from First-hand experience when making my two Choppers that Grinding down that Notch is not problem and does in fact allow the use of just about any Bars that are of the same diameter.Georgey wrote: ↑Thu Aug 11, 2022 7:36 pmCan anyone recommend aftermarket risers that fit the triple tree? I have the triple tree that fits the wide OEM risers (the OEM risers that have a metal notch to keep the OEM bars from slipping - they're real thick fitting in the upper triple tree).
OR does anybody have experience shaving down that "notch" in the riser where the bar rests? I'm trying to fit some aftermarket handlebars and I don't want to drill holes in the bars (so that the notch fits into the bar).
Pleas let me know!!!
Since the Risers are chromed, I do suggest you be Careful when grinding so you don't chip off the chrome you want left on the Risers themselves. Cutting with a Saw would be a mistake.
-
- Learning My Moped
- Posts: 107
- Joined: Tue Jan 12, 2021 12:40 pm
- My Bike: 2002 1994 1994[2] 1997 vs800
Re: Aftermarket risers for the WIDE risers with the notch where the bar rests
Thanks Designer - While you posted I just did what you said - I grounded them down with a carbide rotary burr . Thanks!! And it was easy - just like you said - easier than I thought it would be.