WTB for 86 VS700

Buy, sell or trade. This is the place for it.
Be aware that transactions here are in no way the responsibility of this forum.
TripleKing
Practicing Bicycling
Posts: 31
Joined: Thu Jun 18, 2020 7:45 pm
My Bike: Intruder VS700
Location: Pocono Mts, PA
Contact:

WTB for 86 VS700

Post by TripleKing »

For my 86 VS700 project, I need

1) Fuel tank. No dents. Color not important. Will consider an year that fits.

2) Forks. Will consider thicker later forks, if triples are included.

3) Rear sear and back rest, if in good condition.

Thx

Swcoinguy
Got My M1 License!
Posts: 424
Joined: Sat Oct 11, 2014 9:36 am
My Bike: Vs800+c90
Location: Ft Myers, Florida

Re: WTB for 86 VS700

Post by Swcoinguy »

If your profile had any info we would know where your located. Where are you located?
I have all of the parts your looking for from a VS700 I parted out a while ago.

TripleKing
Practicing Bicycling
Posts: 31
Joined: Thu Jun 18, 2020 7:45 pm
My Bike: Intruder VS700
Location: Pocono Mts, PA
Contact:

Re: WTB for 86 VS700

Post by TripleKing »

Sorry. I am in NE PA

navigator
Joined a 1100cc Club
Posts: 5500
Joined: Thu Dec 29, 2016 12:33 pm
My Bike: VS800

Re: WTB for 86 VS700

Post by navigator »

The triples should fit. I have a set of triples, both forks, and a tank (black).All from a '07 vs800.
I'll have to check on the rear seat and backrest. Can't remember if I sold them or still have them.
I'm in upstate NY, If you are interested, shoot me an email.

Swcoinguy
Got My M1 License!
Posts: 424
Joined: Sat Oct 11, 2014 9:36 am
My Bike: Vs800+c90
Location: Ft Myers, Florida

Re: WTB for 86 VS700

Post by Swcoinguy »

TripleKing wrote:
Sat Jun 27, 2020 6:50 am
Sorry. I am in NE PA
10-4. Nav is closer to you, I'm in Florida. If he doesn't have what you need, let me know.

TripleKing
Practicing Bicycling
Posts: 31
Joined: Thu Jun 18, 2020 7:45 pm
My Bike: Intruder VS700
Location: Pocono Mts, PA
Contact:

Re: WTB for 86 VS700

Post by TripleKing »

Navigator, sent you an email

TripleKing
Practicing Bicycling
Posts: 31
Joined: Thu Jun 18, 2020 7:45 pm
My Bike: Intruder VS700
Location: Pocono Mts, PA
Contact:

Re: WTB for 86 VS700

Post by TripleKing »

Navigator, I am having trouble getting in touch. I still need a tank.

Thx

Swcoinguy
Got My M1 License!
Posts: 424
Joined: Sat Oct 11, 2014 9:36 am
My Bike: Vs800+c90
Location: Ft Myers, Florida

Re: WTB for 86 VS700

Post by Swcoinguy »

TripleKing wrote:
Wed Aug 12, 2020 8:15 pm
Navigator, I am having trouble getting in touch. I still need a tank.

Thx
I have a tank from an 87 that(as I recall)is in great shape. It's been in a box for a long while. I doubt I'll ever need it so I'd let it go. If you can't get ahold of Navigator or he doesn't have a tank you can PM me or post in this thread. If you are interested in it I can put eyes on it and take some pics if needed.

TripleKing
Practicing Bicycling
Posts: 31
Joined: Thu Jun 18, 2020 7:45 pm
My Bike: Intruder VS700
Location: Pocono Mts, PA
Contact:

Re: WTB for 86 VS700

Post by TripleKing »

I still need it and cannot get in touch with him.

navigator
Joined a 1100cc Club
Posts: 5500
Joined: Thu Dec 29, 2016 12:33 pm
My Bike: VS800

Re: WTB for 86 VS700

Post by navigator »

TripleKing wrote:
Thu Aug 13, 2020 7:54 am
I still need it and cannot get in touch with him.
I just sent you an email.

TripleKing
Practicing Bicycling
Posts: 31
Joined: Thu Jun 18, 2020 7:45 pm
My Bike: Intruder VS700
Location: Pocono Mts, PA
Contact:

Re: WTB for 86 VS700

Post by TripleKing »

Swcoinguy wrote:
Thu Aug 13, 2020 5:16 am
TripleKing wrote:
Wed Aug 12, 2020 8:15 pm
Navigator, I am having trouble getting in touch. I still need a tank.

Thx
I have a tank from an 87 that(as I recall)is in great shape. It's been in a box for a long while. I doubt I'll ever need it so I'd let it go. If you can't get ahold of Navigator or he doesn't have a tank you can PM me or post in this thread. If you are interested in it I can put eyes on it and take some pics if needed.
What color is your tank? I saw pics of Navigator's tank and it looks very nice. I would probably go with his unless yours is Maroon and in as nice shape.

Thx

Swcoinguy
Got My M1 License!
Posts: 424
Joined: Sat Oct 11, 2014 9:36 am
My Bike: Vs800+c90
Location: Ft Myers, Florida

Re: WTB for 86 VS700

Post by Swcoinguy »

TripleKing wrote:
Fri Aug 14, 2020 2:01 pm
Swcoinguy wrote:
Thu Aug 13, 2020 5:16 am
TripleKing wrote:
Wed Aug 12, 2020 8:15 pm
Navigator, I am having trouble getting in touch. I still need a tank.

Thx
I have a tank from an 87 that(as I recall)is in great shape. It's been in a box for a long while. I doubt I'll ever need it so I'd let it go. If you can't get ahold of Navigator or he doesn't have a tank you can PM me or post in this thread. If you are interested in it I can put eyes on it and take some pics if needed.
What color is your tank? I saw pics of Navigator's tank and it looks very nice. I would probably go with his unless yours is Maroon and in as nice shape.

Thx
It's the factory color-like a reddish maroon. It's not the more purple red, it's closer to red than purple(I think). I can throw a couple pics of the fenders or side covers if you'd like. I know those are sitting on a shelf and I can put my hands on them easily. If it's the right color I can pull the tank out.

TripleKing
Practicing Bicycling
Posts: 31
Joined: Thu Jun 18, 2020 7:45 pm
My Bike: Intruder VS700
Location: Pocono Mts, PA
Contact:

Re: WTB for 86 VS700

Post by TripleKing »

Yes, pictures would be great. I think yours might be the candy grape maroon which had a purple hue about it. Mine, I think, is Luxury Candy Maroon. There is a lot of paint damage on the swing arm and drive shaft cover. I was going to paint them black as it is impossible to find the original paint or have it mixed. If I did that, I would do the fenders and side covers black as well and leave the frame maroon. Navigator has a very nice tank in black. His would work if I went the two-tone look. I had thoughts about making this a true project as I did my recently sold 99 Magna.

I rescued this bike from a friend who was going to junk it with 8.600 miles because he is in his 70s, dropped it in his driveway a few times and no loger rides. I put it bank on the road for him 5 years ago and he let it go down hill. Once I fix it up, I am probably going to sell it for about what I will have in it +/-. I don't want to see a good bike scrapped. I would rather see someone enjoy it.

navigator
Joined a 1100cc Club
Posts: 5500
Joined: Thu Dec 29, 2016 12:33 pm
My Bike: VS800

Re: WTB for 86 VS700

Post by navigator »

You can get paint to match your bike from https://www.colorrite.com/
If you wanted to paint.
Sounds like Swcoinguys tank may be your color, In that case use his tank.

Swcoinguy
Got My M1 License!
Posts: 424
Joined: Sat Oct 11, 2014 9:36 am
My Bike: Vs800+c90
Location: Ft Myers, Florida

Re: WTB for 86 VS700

Post by Swcoinguy »

TripleKing wrote:
Sat Aug 15, 2020 7:14 am
Yes, pictures would be great. I think yours might be the candy grape maroon which had a purple hue about it. Mine, I think, is Luxury Candy Maroon. There is a lot of paint damage on the swing arm and drive shaft cover. I was going to paint them black as it is impossible to find the original paint or have it mixed. If I did that, I would do the fenders and side covers black as well and leave the frame maroon. Navigator has a very nice tank in black. His would work if I went the two-tone look. I had thoughts about making this a true project as I did my recently sold 99 Magna.

I rescued this bike from a friend who was going to junk it with 8.600 miles because he is in his 70s, dropped it in his driveway a few times and no loger rides. I put it bank on the road for him 5 years ago and he let it go down hill. Once I fix it up, I am probably going to sell it for about what I will have in it +/-. I don't want to see a good bike scrapped. I would rather see someone enjoy it.
PM or email me a number and I'll send you some pics.

navigator
Joined a 1100cc Club
Posts: 5500
Joined: Thu Dec 29, 2016 12:33 pm
My Bike: VS800

Re: WTB for 86 VS700

Post by navigator »

I don't think he has enough posts to PM you....email maybe.

Swcoinguy
Got My M1 License!
Posts: 424
Joined: Sat Oct 11, 2014 9:36 am
My Bike: Vs800+c90
Location: Ft Myers, Florida

Re: WTB for 86 VS700

Post by Swcoinguy »

navigator wrote:
Sat Aug 15, 2020 1:28 pm
I don't think he has enough posts to PM you....email maybe.
I didn't know there was a requirement for PM's. Thanks for the tip.

TripleKing
Practicing Bicycling
Posts: 31
Joined: Thu Jun 18, 2020 7:45 pm
My Bike: Intruder VS700
Location: Pocono Mts, PA
Contact:

Re: WTB for 86 VS700

Post by TripleKing »

DK I can PM. My email s/b accessible via the board. Colorite may have paint. I may want to go black with it anyway.

Swcoinguy
Got My M1 License!
Posts: 424
Joined: Sat Oct 11, 2014 9:36 am
My Bike: Vs800+c90
Location: Ft Myers, Florida

Re: WTB for 86 VS700

Post by Swcoinguy »

TripleKing wrote:
Sat Aug 15, 2020 6:41 pm
DK I can PM. My email s/b accessible via the board. Colorite may have paint. I may want to go black with it anyway.
I tried to email pictures to you through the boards email link. I don't see a way to add pictures though. I can send them through regular email if you give me an address.

navigator
Joined a 1100cc Club
Posts: 5500
Joined: Thu Dec 29, 2016 12:33 pm
My Bike: VS800

Re: WTB for 86 VS700

Post by navigator »

Swcoinguy wrote:
Mon Aug 17, 2020 3:55 pm
TripleKing wrote:
Sat Aug 15, 2020 6:41 pm
DK I can PM. My email s/b accessible via the board. Colorite may have paint. I may want to go black with it anyway.
I tried to email pictures to you through the boards email link. I don't see a way to add pictures though. I can send them through regular email if you give me an address.
email him thru the board.
When he responds, you will have his email addy.
then send pics to his email....easy, peasy. :ShitGrin:

Post Reply