WTB front/back rims, drum brake, front brake rotor.
-
- Scooter Enthusiast
- Posts: 251
- Joined: Sat May 09, 2020 9:50 pm
- My Bike: Suzuki Intruder VS800
WTB front/back rims, drum brake, front brake rotor.
Looking for parts in decent shape. These parts on my bike are corroded and/or rusty. Figure now is a good time to upgrade if I can. Thanks.
- BRONX INTRUDER
- Joined a 850cc Club
- Posts: 1437
- Joined: Sat Sep 27, 2014 9:00 pm
- My Bike: vs1400
- Location: Clearfield, PA
-
- Scooter Enthusiast
- Posts: 251
- Joined: Sat May 09, 2020 9:50 pm
- My Bike: Suzuki Intruder VS800
Re: WTB front/back rims, drum brake, front brake rotor.
Hudson Valley NY
- BRONX INTRUDER
- Joined a 850cc Club
- Posts: 1437
- Joined: Sat Sep 27, 2014 9:00 pm
- My Bike: vs1400
- Location: Clearfield, PA
Re: WTB front/back rims, drum brake, front brake rotor.
Ok. I'll try to grab some pics for ya tomorrow.
- BRONX INTRUDER
- Joined a 850cc Club
- Posts: 1437
- Joined: Sat Sep 27, 2014 9:00 pm
- My Bike: vs1400
- Location: Clearfield, PA
Re: WTB front/back rims, drum brake, front brake rotor.
Rear wheel
Rear snowflake; just in case
Fender struts
Drum brake - I can see how much a little polish cleans it up; if you'd like.
Rotors, front 21" rim has a little lip
Rear snowflake; just in case
Fender struts
Drum brake - I can see how much a little polish cleans it up; if you'd like.
Rotors, front 21" rim has a little lip
-
- Scooter Enthusiast
- Posts: 251
- Joined: Sat May 09, 2020 9:50 pm
- My Bike: Suzuki Intruder VS800
Re: WTB front/back rims, drum brake, front brake rotor.
Definitely interested in the fender struts, how much to ship to 12589? The drum brake looks to be in the same condition as my current one. I'd be interested to see what it looks like after some polish though. Getting a matching set of snowflake rims would definitely be the dream, not sure where I'd find a matching front rim and I know they go for a pretty penny. Id be interested in the stock rims too, sounds like the front rim won't work for me though. I'd be interested in the back potentially. Also interested in the brake rotors, how much for the rotor and the struts?
-
- Joined a 1100cc Club
- Posts: 5518
- Joined: Thu Dec 29, 2016 12:33 pm
- My Bike: VS800
Re: WTB front/back rims, drum brake, front brake rotor.
Your brake assembly is clear coated aluminum, same as the fork lowers.
The problem is when the finish is chipped it will corrode underneath.
You can use aircraft paint stripper to remove the clearcoat. then sand it with 150 emery followed by 400 wet sanding, then use a good quality metal polish and it will clean up nicely.
The problem is when the finish is chipped it will corrode underneath.
You can use aircraft paint stripper to remove the clearcoat. then sand it with 150 emery followed by 400 wet sanding, then use a good quality metal polish and it will clean up nicely.
- BRONX INTRUDER
- Joined a 850cc Club
- Posts: 1437
- Joined: Sat Sep 27, 2014 9:00 pm
- My Bike: vs1400
- Location: Clearfield, PA
Re: WTB front/back rims, drum brake, front brake rotor.
Thanks for the tip brother.navigator wrote: ↑Sun Feb 13, 2022 9:09 amYour brake assembly is clear coated aluminum, same as the fork lowers.
The problem is when the finish is chipped it will corrode underneath.
You can use aircraft paint stripper to remove the clearcoat. then sand it with 150 emery followed by 400 wet sanding, then use a good quality metal polish and it will clean up nicely.
-
- Riding on Learners Permit
- Posts: 157
- Joined: Sun May 08, 2016 5:59 am
- My Bike: 2005 s83
Re: WTB front/back rims, drum brake, front brake rotor.
Bronx, is there any rust at all on the struts? How much to ship to 41256?
- BRONX INTRUDER
- Joined a 850cc Club
- Posts: 1437
- Joined: Sat Sep 27, 2014 9:00 pm
- My Bike: vs1400
- Location: Clearfield, PA
- BRONX INTRUDER
- Joined a 850cc Club
- Posts: 1437
- Joined: Sat Sep 27, 2014 9:00 pm
- My Bike: vs1400
- Location: Clearfield, PA
Re: WTB front/back rims, drum brake, front brake rotor.
I'll box and get a ship estimate for ya soon.Acton67 wrote: ↑Sun Feb 13, 2022 8:26 amDefinitely interested in the fender struts, how much to ship to 12589? The drum brake looks to be in the same condition as my current one. I'd be interested to see what it looks like after some polish though. Getting a matching set of snowflake rims would definitely be the dream, not sure where I'd find a matching front rim and I know they go for a pretty penny. Id be interested in the stock rims too, sounds like the front rim won't work for me though. I'd be interested in the back potentially. Also interested in the brake rotors, how much for the rotor and the struts?
-
- Scooter Enthusiast
- Posts: 251
- Joined: Sat May 09, 2020 9:50 pm
- My Bike: Suzuki Intruder VS800
Re: WTB front/back rims, drum brake, front brake rotor.
Awesome.BRONX INTRUDER wrote: ↑Sun Feb 13, 2022 6:51 pmI'll box and get a ship estimate for ya soon.Acton67 wrote: ↑Sun Feb 13, 2022 8:26 amDefinitely interested in the fender struts, how much to ship to 12589? The drum brake looks to be in the same condition as my current one. I'd be interested to see what it looks like after some polish though. Getting a matching set of snowflake rims would definitely be the dream, not sure where I'd find a matching front rim and I know they go for a pretty penny. Id be interested in the stock rims too, sounds like the front rim won't work for me though. I'd be interested in the back potentially. Also interested in the brake rotors, how much for the rotor and the struts?
-
- Riding on Learners Permit
- Posts: 157
- Joined: Sun May 08, 2016 5:59 am
- My Bike: 2005 s83
Re: WTB front/back rims, drum brake, front brake rotor.
vs 1400 fender struts
- BRONX INTRUDER
- Joined a 850cc Club
- Posts: 1437
- Joined: Sat Sep 27, 2014 9:00 pm
- My Bike: vs1400
- Location: Clearfield, PA