SOLD : vs1400 INTRUDER Powder Coated With Upgrades
- BRONX INTRUDER
- Joined a 850cc Club
- Posts: 1437
- Joined: Sat Sep 27, 2014 9:00 pm
- My Bike: vs1400
- Location: Clearfield, PA
SOLD : vs1400 INTRUDER Powder Coated With Upgrades
SOLD
5-speed Transmission
Performance Designer Clutch Springs
Stock Air-Filters were tossed and K&N Pod Filters Installed
Double Barrel ShotGun Exhaust
Carbs are Jetted to compensate for added Air-Intake and Free'er Flowing Exhaust
Stock Ignitor Tossed and Dynatek Dyna 3000 Ignition Module Installed
Stock horn tossed and Installed WOLO Bad-Boy Air-Horn (May Never Need it With The ShotGun Pipes lol)
Stock bulbs removed from Speedo & Cluster and LED's Installed for Better Visibility
Stock handlebars tossed and fitted with Black Z-Bars
Stock rear shocks tossed and Lowered Progressive 412 Shocks Installed
Many chrome parts have been Black Powder-Coated
Control housings have been Blacked-Out
Tossed stock grips and fitted Black Iso-Grips
Stock signals (front & back) have been tossed and Installed Black Arlen-Ness LED Signals
Stock 2pc button seat tossed and Installed 1pc s83 Seat
New Tires and Brakes
]
5-speed Transmission
Performance Designer Clutch Springs
Stock Air-Filters were tossed and K&N Pod Filters Installed
Double Barrel ShotGun Exhaust
Carbs are Jetted to compensate for added Air-Intake and Free'er Flowing Exhaust
Stock Ignitor Tossed and Dynatek Dyna 3000 Ignition Module Installed
Stock horn tossed and Installed WOLO Bad-Boy Air-Horn (May Never Need it With The ShotGun Pipes lol)
Stock bulbs removed from Speedo & Cluster and LED's Installed for Better Visibility
Stock handlebars tossed and fitted with Black Z-Bars
Stock rear shocks tossed and Lowered Progressive 412 Shocks Installed
Many chrome parts have been Black Powder-Coated
Control housings have been Blacked-Out
Tossed stock grips and fitted Black Iso-Grips
Stock signals (front & back) have been tossed and Installed Black Arlen-Ness LED Signals
Stock 2pc button seat tossed and Installed 1pc s83 Seat
New Tires and Brakes
]
- BRONX INTRUDER
- Joined a 850cc Club
- Posts: 1437
- Joined: Sat Sep 27, 2014 9:00 pm
- My Bike: vs1400
- Location: Clearfield, PA
Re: F/S: vs1400 INTRUDER Powder Coated With Upgrades
Thanks brother.
lol. No way. Sometimes you find people who give stuff away cheap because they have money and it's no big deal lol.. I'm not really one of those people when it comes to big things. lol. How about 3,500. lol.
lol. No way. Sometimes you find people who give stuff away cheap because they have money and it's no big deal lol.. I'm not really one of those people when it comes to big things. lol. How about 3,500. lol.
- BRONX INTRUDER
- Joined a 850cc Club
- Posts: 1437
- Joined: Sat Sep 27, 2014 9:00 pm
- My Bike: vs1400
- Location: Clearfield, PA
-
- Tricycles are Cool
- Posts: 13
- Joined: Mon May 09, 2016 3:03 pm
- My Bike: 05 s83 trike
Re: F/S: vs1400 INTRUDER Powder Coated With Upgrades
What's up Bronx?!?!? I finally found the new site. Is this the one you were building right before the old site went down? If it is I'm glad I got to see it. I was wondering how it turned out. I injured my shoulder so I have my trike down and in parts changing some things. When I get it done I'll post some pics. I haven't really done anything to it but ride it since the old site went down. I probably should take a few more Picts though. Lol
- FallenAngel
- Joined a 950cc Club
- Posts: 2266
- Joined: Wed Apr 06, 2016 1:37 am
- My Bike: Suzuki Intruder 1400
- Location: Seattle,Wa
Re: F/S: vs1400 INTRUDER Powder Coated With Upgrades
Very Nice
Happy to see its finished
Happy to see its finished
- wj_hurd
- Got My M1 License!
- Posts: 425
- Joined: Mon Sep 29, 2014 1:28 pm
- Location: Rochester, NY
Re: F/S: vs1400 INTRUDER Powder Coated With Upgrades
Bronx....
I see no back rest... As I inquired before, how to remove it and make it look good.
Can you link some picts of how you did that on the bike, and tell me what you used? Its clean and I like it!
I'm not much for blacked out bikes, I have a fondness of chrome... but that is one sexy bitch!
Honestly... If I had the coin... I'd buy it!
Wanna trade even up?!
I see no back rest... As I inquired before, how to remove it and make it look good.
Can you link some picts of how you did that on the bike, and tell me what you used? Its clean and I like it!
I'm not much for blacked out bikes, I have a fondness of chrome... but that is one sexy bitch!
Honestly... If I had the coin... I'd buy it!
Wanna trade even up?!
1996 VS1400GL, Jardine Drag pipes, K&N Filters.
-
- Joined a 850cc Club
- Posts: 1485
- Joined: Sun Sep 14, 2014 4:45 pm
- My Bike: 1996 Suzuki Intruder
- Location: Roanoke, VA
Re: F/S: vs1400 INTRUDER Powder Coated With Upgrades
Hmmm....I'd be tempted too, but it would get ape hangers....I don't bend over for NOBODY!
- enforcer
- Joined a 650cc Club
- Posts: 1138
- Joined: Wed Feb 03, 2016 7:29 pm
- My Bike: 03 HD FLHT 01 Yamaha XVS650
Re: F/S: vs1400 INTRUDER Powder Coated With Upgrades
wj_hurd wrote: Honestly... If I had the coin... I'd buy it!
Wanna trade even up?!
We bikeaholics must think alike.jonnycando wrote:Hmmm....I'd be tempted too, but it would get ape hangers....I don't bend over for NOBODY!
What year motor is in there anyway Mark?
Current rides: 03 HD FLHT & 01 Yamaha XVS650(BIP)
Former: 87 Suzuki VS700, 94 BMW K1100LT & 91 Honda CB250
I don't want to own them all, just ride them all.
Former: 87 Suzuki VS700, 94 BMW K1100LT & 91 Honda CB250
I don't want to own them all, just ride them all.
- BRONX INTRUDER
- Joined a 850cc Club
- Posts: 1437
- Joined: Sat Sep 27, 2014 9:00 pm
- My Bike: vs1400
- Location: Clearfield, PA
Re: F/S: vs1400 INTRUDER Powder Coated With Upgrades
Yes, thanks brother. Had to fill in alot with my own parts but got her done. haha. Sorry bout your injury; hope you're healing up quickly.Plus1 wrote:What's up Bronx?!?!? I finally found the new site. Is this the one you were building right before the old site went down? If it is I'm glad I got to see it. I was wondering how it turned out. I injured my shoulder so I have my trike down and in parts changing some things. When I get it done I'll post some pics. I haven't really done anything to it but ride it since the old site went down. I probably should take a few more Picts though. Lol
- BRONX INTRUDER
- Joined a 850cc Club
- Posts: 1437
- Joined: Sat Sep 27, 2014 9:00 pm
- My Bike: vs1400
- Location: Clearfield, PA
Re: F/S: vs1400 INTRUDER Powder Coated With Upgrades
I'm 5'8 and it's not really a bent over position for me. lol. The broomstick I had originally had a way aggressive forward lean.. bit much for what this bike's look is so changed to the Z.jonnycando wrote:Hmmm....I'd be tempted too, but it would get ape hangers....I don't bend over for NOBODY!
- BRONX INTRUDER
- Joined a 850cc Club
- Posts: 1437
- Joined: Sat Sep 27, 2014 9:00 pm
- My Bike: vs1400
- Location: Clearfield, PA
Re: F/S: vs1400 INTRUDER Powder Coated With Upgrades
lol. Ty bro. I'll try to get pics soon, I just got back from NC yesterday (drove up, put in my 4Runner, rested few hrs, drove back) retrieving my other 1400.. friend was moving and could't take it to new residence.wj_hurd wrote:Bronx....
I see no back rest... As I inquired before, how to remove it and make it look good.
Can you link some picts of how you did that on the bike, and tell me what you used? Its clean and I like it!
I'm not much for blacked out bikes, I have a fondness of chrome... but that is one sexy bitch!
Honestly... If I had the coin... I'd buy it!
Wanna trade even up?!