Vertical Plate Holder(s)
Posted: Sat Jan 10, 2015 9:53 pm
Vertical Plate Holder(s)
2 Versions
2 Versions
Pic #1 Just a close up from the rear
Pic #2 Close up from the side
Pic #3 Pie shaped or semi triangle, stainless steel,
5 1/2 inches long by 4 inches wide with
1 1/2 inches at 90% bend at what would be the pie crust.
Leaves 4 inches showing, with holes drilled for license bracket.
For license plate lite installation, leave top side about
1 or 1 1/2 inches longer. Auto zone has a light that is a perfect
fit, reasonably priced.
One hole drilled at narrow part. Leave some shoulder for
strength to attach holder to bottom shock mount bolt.
I took pair of visegrips & turned down the edges all way
around til I got to the bend, at the pie crust for added
strength & it looks better.
Pictures & the rest of the info can be found @ Night_Wolf's Lair/Wrenching & Tips