Hello fine people
Are there any suggestions on how to remove(replace) the right driver foot peg on a 99 Suzuki VS1400GLP Intruder? (Short of taking the bike apart )
Much appreciated, as I would love to get another month of tranquil riding in... 8-)
Foot Peg removal
-
- Tricycles are Cool
- Posts: 7
- Joined: Fri Aug 03, 2018 2:45 pm
- My Bike: 99 Suzuki VS1400GLP Intruder
-
- Joined a 1100cc Club
- Posts: 5528
- Joined: Thu Dec 29, 2016 12:33 pm
- My Bike: VS800
Re: Foot Peg removal
If it is bent, you can remove the screws underneath, slide the rubber off, and straighten the tang with a piece of pipe.
Otherwise, you need to remove the exhaust and lower the peg bracket.
Otherwise, you need to remove the exhaust and lower the peg bracket.
- WintrSol
- Joined a 450cc Club
- Posts: 857
- Joined: Fri Feb 26, 2016 2:02 pm
- My Bike: CB450 GL1500CT
- Location: Near St. Louis, MO
Re: Foot Peg removal
If you have to remove the footrest assembly (usually do), you should know about the locking pins on the four bolts that hold it on, #4 in this drawing: https://www.partsoutlaw.com/oemparts/a/ ... 2/footrest
Florissant, MO
CB450K3, GL1500CTValkyrie
CB450K3, GL1500CTValkyrie
-
- Joined a 1100cc Club
- Posts: 5528
- Joined: Thu Dec 29, 2016 12:33 pm
- My Bike: VS800
Re: Foot Peg removal
And the service manual is here:
viewtopic.php?f=10&t=3338
viewtopic.php?f=10&t=3338