Anyone have any issues with the board?
-
- Joined a 950cc Club
- Posts: 2152
- Joined: Mon Dec 15, 2014 11:33 pm
- My Bike: VS1400
- Location: NE FL
Re: Anyone have any issues with the board?
Board...paddle...ah, yes ...rubber hose. Some kids you just can't reach with corporal punishment. My cousin was one of them. He could have been beat to death and he would have been defiant to the end. And the end did eventually come, in a bar fight. Shot to death at the age of 32.
- Jolsen
- Joined a 1100cc Club
- Posts: 5574
- Joined: Tue Sep 16, 2014 12:34 pm
- My Bike: ZG-XII and VS-XIV
- Moniker: Postmaster
- Location: North Pole
Re: Anyone have any issues with the board?
I have a cousin just like that. He keeps running full speed into the brick wall going if I keep doing it I will get used to it and then it will stop hurting right?
Mean while most learn not to run into brick walls...
Sent from my XT1254 using Tapatalk
Mean while most learn not to run into brick walls...
Sent from my XT1254 using Tapatalk
VS1400 Wiring Diagram INFOWARS
Its not my job to prove myself every time I state facts. Its YOUR job to look it up and find out what I say is true.
- Night_Wolf
- Scooter Enthusiast
- Posts: 280
- Joined: Mon Jan 05, 2015 7:03 pm
- My Bike: 2006 1400 Intruder
- Location: Calgary Alberta
- Contact:
Re: Anyone have any issues with the board?
I have created a cpl pages in the tech section so far and for some reason the link included in the post does NOT open in a new window
Just as I don't want my info copied, I don't want links to my site to take people away from this site
Check this Link to a thread I created & click the link I included in the post & you'll see what I mean.
IMO all Links within a post should open their own window (I am pretty sure you agree with it) as it keeps "traffic" here
Just as I don't want my info copied, I don't want links to my site to take people away from this site
Check this Link to a thread I created & click the link I included in the post & you'll see what I mean.
IMO all Links within a post should open their own window (I am pretty sure you agree with it) as it keeps "traffic" here
Type @ Ya'll Later
Night_Wolf
Intruder Alert Canada/Night_Wolf's Lair
Alberta Adventure Riders
2006 VS1400 2020 V85TT
Night_Wolf
Intruder Alert Canada/Night_Wolf's Lair
Alberta Adventure Riders
2006 VS1400 2020 V85TT
- Night_Wolf
- Scooter Enthusiast
- Posts: 280
- Joined: Mon Jan 05, 2015 7:03 pm
- My Bike: 2006 1400 Intruder
- Location: Calgary Alberta
- Contact:
Re: Anyone have any issues with the board?
Really? Could it be the browser I'm using? I use Chrome. If I click on one of the links to my site(s) it takes me away from here Even if I click the links in my new sig file it leaves this site98VS1400 wrote: Worked fine for me.
Type @ Ya'll Later
Night_Wolf
Intruder Alert Canada/Night_Wolf's Lair
Alberta Adventure Riders
2006 VS1400 2020 V85TT
Night_Wolf
Intruder Alert Canada/Night_Wolf's Lair
Alberta Adventure Riders
2006 VS1400 2020 V85TT
- Night_Wolf
- Scooter Enthusiast
- Posts: 280
- Joined: Mon Jan 05, 2015 7:03 pm
- My Bike: 2006 1400 Intruder
- Location: Calgary Alberta
- Contact:
Re: Anyone have any issues with the board?
In the control panel here?98VS1400 wrote:I use Chrome also. Every link in this forum should open in a new tab. You might have your settings set to make it open in the same tab.
Type @ Ya'll Later
Night_Wolf
Intruder Alert Canada/Night_Wolf's Lair
Alberta Adventure Riders
2006 VS1400 2020 V85TT
Night_Wolf
Intruder Alert Canada/Night_Wolf's Lair
Alberta Adventure Riders
2006 VS1400 2020 V85TT
- Night_Wolf
- Scooter Enthusiast
- Posts: 280
- Joined: Mon Jan 05, 2015 7:03 pm
- My Bike: 2006 1400 Intruder
- Location: Calgary Alberta
- Contact:
Re: Anyone have any issues with the board?
Ok so I can add an extension to Chrome & that will work for me. The thing is I know of the issue, so I know how to get around it :smoke: . The issue is for those who don't know of a work around, click on a link, and are taken away from this site which nobody who runs a forum or builds a website wants. On my personal page(s) ALL links automatically open in a New Window/Tab without any interaction from the visitor98VS1400 wrote:
In the control panel here?
No, in Chrome. Watch this:
Type @ Ya'll Later
Night_Wolf
Intruder Alert Canada/Night_Wolf's Lair
Alberta Adventure Riders
2006 VS1400 2020 V85TT
Night_Wolf
Intruder Alert Canada/Night_Wolf's Lair
Alberta Adventure Riders
2006 VS1400 2020 V85TT
- Jolsen
- Joined a 1100cc Club
- Posts: 5574
- Joined: Tue Sep 16, 2014 12:34 pm
- My Bike: ZG-XII and VS-XIV
- Moniker: Postmaster
- Location: North Pole
Re: Anyone have any issues with the board?
Works for me.
Sent from my XT1254 using Tapatalk
Sent from my XT1254 using Tapatalk
VS1400 Wiring Diagram INFOWARS
Its not my job to prove myself every time I state facts. Its YOUR job to look it up and find out what I say is true.
-
- Joined a 950cc Club
- Posts: 2152
- Joined: Mon Dec 15, 2014 11:33 pm
- My Bike: VS1400
- Location: NE FL
Re: Anyone have any issues with the board?
Worked OK for me too.
- Night_Wolf
- Scooter Enthusiast
- Posts: 280
- Joined: Mon Jan 05, 2015 7:03 pm
- My Bike: 2006 1400 Intruder
- Location: Calgary Alberta
- Contact:
Re: Anyone have any issues with the board?
Ok just as long as it works Doesn't work for me
Type @ Ya'll Later
Night_Wolf
Intruder Alert Canada/Night_Wolf's Lair
Alberta Adventure Riders
2006 VS1400 2020 V85TT
Night_Wolf
Intruder Alert Canada/Night_Wolf's Lair
Alberta Adventure Riders
2006 VS1400 2020 V85TT
- BlacktopTravelr
- Joined a 1200cc Club
- Posts: 8992
- Joined: Mon Sep 22, 2014 5:02 pm
- My Bike: Stolen 1-7-15 Returned 1-21-15
- Location: Eufaula, Okla
Re: Anyone have any issues with the board?
Ok, I clicked on the Night_Wolf's Lair link and was taken to a new tab that showed the http://www.intruderalert.ca/tips_compact_airhorn.htm" onclick="window.open(this.href);return false; site.
(putt putt putt)
90 to 95% of my replies are for my own entertainment
- Night_Wolf
- Scooter Enthusiast
- Posts: 280
- Joined: Mon Jan 05, 2015 7:03 pm
- My Bike: 2006 1400 Intruder
- Location: Calgary Alberta
- Contact:
Re: Anyone have any issues with the board?
That works don't know why it doesn't for me Since it's my site I'll link directly to the individual pages, otherwise links should go to my front page :smoke:BlacktopTravelr wrote:Ok, I clicked on the Night_Wolf's Lair link and was taken to a new tab that showed the http://www.intruderalert.ca/tips_compact_airhorn.htm" onclick="window.open(this.href);return false; site.
Type @ Ya'll Later
Night_Wolf
Intruder Alert Canada/Night_Wolf's Lair
Alberta Adventure Riders
2006 VS1400 2020 V85TT
Night_Wolf
Intruder Alert Canada/Night_Wolf's Lair
Alberta Adventure Riders
2006 VS1400 2020 V85TT
- Fred
- WHEELIES R FUN!
- Posts: 4527
- Joined: Tue Dec 02, 2014 12:08 am
- My Bike: VS 1400. Royal Enfield
Re: Anyone have any issues with the board?
A very nice chap on the Purple page has Pm'e me about simplifying the intruders wiring system to bare basics. This is something I did some time ago. However Pm' ing him back is a feel a waste considering the time I will have to put into it and I thought I would invite him here where I can prepare a topic on that subject. Or open a topic on IA where I feel it would not be appreciated. Its not something every body wants to do but this man does. Is this poaching and or inappropriate ?
- Night_Wolf
- Scooter Enthusiast
- Posts: 280
- Joined: Mon Jan 05, 2015 7:03 pm
- My Bike: 2006 1400 Intruder
- Location: Calgary Alberta
- Contact:
Re: Anyone have any issues with the board?
Poaching from the forum may or may not be a big deal; depends upon who finds the poached material here. Poaching from a personal website (like mine ) should not be done as there can be legal consequences for this sites ownersFred wrote:A very nice chap on the Purple page has Pm'e me about simplifying the intruders wiring system to bare basics. This is something I did some time ago. However Pm' ing him back is a feel a waste considering the time I will have to put into it and I thought I would invite him here where I can prepare a topic on that subject. Or open a topic on IA where I feel it would not be appreciated. Its not something every body wants to do but this man does. Is this poaching and or inappropriate ?
Type @ Ya'll Later
Night_Wolf
Intruder Alert Canada/Night_Wolf's Lair
Alberta Adventure Riders
2006 VS1400 2020 V85TT
Night_Wolf
Intruder Alert Canada/Night_Wolf's Lair
Alberta Adventure Riders
2006 VS1400 2020 V85TT
- MadCow
- Site Admin
- Posts: 6303
- Joined: Thu Sep 18, 2014 1:36 pm
- My Bike: 2023 Pan America Special
Re: Anyone have any issues with the board?
Night_Wolf wrote:Poaching from the forum may or may not be a big deal; depends upon who finds the poached material here. Poaching from a personal website (like mine ) should not be done as there can be legal consequences for this sites ownersFred wrote:A very nice chap on the Purple page has Pm'e me about simplifying the intruders wiring system to bare basics. This is something I did some time ago. However Pm' ing him back is a feel a waste considering the time I will have to put into it and I thought I would invite him here where I can prepare a topic on that subject. Or open a topic on IA where I feel it would not be appreciated. Its not something every body wants to do but this man does. Is this poaching and or inappropriate ?
Where did you get "poaching material" out of what he said?
-DBTO
- MadCow
- Site Admin
- Posts: 6303
- Joined: Thu Sep 18, 2014 1:36 pm
- My Bike: 2023 Pan America Special
Re: Anyone have any issues with the board?
No, of course it's not poaching...you can invite whoever you want to here...regardless of where they came from.Fred wrote:A very nice chap on the Purple page has Pm'e me about simplifying the intruders wiring system to bare basics. This is something I did some time ago. However Pm' ing him back is a feel a waste considering the time I will have to put into it and I thought I would invite him here where I can prepare a topic on that subject. Or open a topic on IA where I feel it would not be appreciated. Its not something every body wants to do but this man does. Is this poaching and or inappropriate ?
-DBTO
- Jolsen
- Joined a 1100cc Club
- Posts: 5574
- Joined: Tue Sep 16, 2014 12:34 pm
- My Bike: ZG-XII and VS-XIV
- Moniker: Postmaster
- Location: North Pole
Re: Anyone have any issues with the board?
Unless they are from trolls.com lol
Sent from my XT1254 using Tapatalk
Sent from my XT1254 using Tapatalk
VS1400 Wiring Diagram INFOWARS
Its not my job to prove myself every time I state facts. Its YOUR job to look it up and find out what I say is true.
- Night_Wolf
- Scooter Enthusiast
- Posts: 280
- Joined: Mon Jan 05, 2015 7:03 pm
- My Bike: 2006 1400 Intruder
- Location: Calgary Alberta
- Contact:
Re: Anyone have any issues with the board?
This line unless I'm not understanding what type of "poaching" Fred was talking about which is entirely possibleMadCow wrote:Where did you get "poaching material" out of what he said?Fred wrote: Is this poaching and or inappropriate ?
Type @ Ya'll Later
Night_Wolf
Intruder Alert Canada/Night_Wolf's Lair
Alberta Adventure Riders
2006 VS1400 2020 V85TT
Night_Wolf
Intruder Alert Canada/Night_Wolf's Lair
Alberta Adventure Riders
2006 VS1400 2020 V85TT
- Jolsen
- Joined a 1100cc Club
- Posts: 5574
- Joined: Tue Sep 16, 2014 12:34 pm
- My Bike: ZG-XII and VS-XIV
- Moniker: Postmaster
- Location: North Pole
Re: Anyone have any issues with the board?
Poached eggs?
Sent from my XT1254 using Tapatalk
Sent from my XT1254 using Tapatalk
VS1400 Wiring Diagram INFOWARS
Its not my job to prove myself every time I state facts. Its YOUR job to look it up and find out what I say is true.
- MadCow
- Site Admin
- Posts: 6303
- Joined: Thu Sep 18, 2014 1:36 pm
- My Bike: 2023 Pan America Special
Re: Anyone have any issues with the board?
He was talking about people, not material.Night_Wolf wrote:This line unless I'm not understanding what type of "poaching" Fred was talking about which is entirely possibleMadCow wrote:Where did you get "poaching material" out of what he said?Fred wrote: Is this poaching and or inappropriate ?
-DBTO
- Jolsen
- Joined a 1100cc Club
- Posts: 5574
- Joined: Tue Sep 16, 2014 12:34 pm
- My Bike: ZG-XII and VS-XIV
- Moniker: Postmaster
- Location: North Pole
Re: Anyone have any issues with the board?
Poached people hmmm
Sent from my XT1254 using Tapatalk
Sent from my XT1254 using Tapatalk
VS1400 Wiring Diagram INFOWARS
Its not my job to prove myself every time I state facts. Its YOUR job to look it up and find out what I say is true.