Anyone have any issues with the board?

All members! Please read this!
This is your information page that lets you know what's happening with the board.
NE_FL
Joined a 950cc Club
Posts: 2152
Joined: Mon Dec 15, 2014 11:33 pm
My Bike: VS1400
Location: NE FL

Re: Anyone have any issues with the board?

Post by NE_FL »

Board...paddle...ah, yes ...rubber hose. Some kids you just can't reach with corporal punishment. My cousin was one of them. He could have been beat to death and he would have been defiant to the end. And the end did eventually come, in a bar fight. Shot to death at the age of 32.

User avatar
Jolsen
Joined a 1100cc Club
Posts: 5574
Joined: Tue Sep 16, 2014 12:34 pm
My Bike: ZG-XII and VS-XIV
Moniker: Postmaster
Location: North Pole

Re: Anyone have any issues with the board?

Post by Jolsen »

I have a cousin just like that. He keeps running full speed into the brick wall going if I keep doing it I will get used to it and then it will stop hurting right?

Mean while most learn not to run into brick walls...

Sent from my XT1254 using Tapatalk
VS1400 Wiring Diagram INFOWARS
Its not my job to prove myself every time I state facts. Its YOUR job to look it up and find out what I say is true.

User avatar
Night_Wolf
Scooter Enthusiast
Posts: 280
Joined: Mon Jan 05, 2015 7:03 pm
My Bike: 2006 1400 Intruder
Location: Calgary Alberta
Contact:

Re: Anyone have any issues with the board?

Post by Night_Wolf »

I have created a cpl pages in the tech section so far and for some reason the link included in the post does NOT open in a new window :bang:

Just as I don't want my info copied, I don't want links to my site to take people away from this site :OhNo;

Check this Link to a thread I created & click the link I included in the post & you'll see what I mean.

IMO all Links within a post should open their own window (I am pretty sure you agree with it) as it keeps "traffic" here
Type @ Ya'll Later
Night_Wolf


Intruder Alert Canada/Night_Wolf's Lair

Alberta Adventure Riders


2006 VS1400 Image 2020 V85TT Image

User avatar
Night_Wolf
Scooter Enthusiast
Posts: 280
Joined: Mon Jan 05, 2015 7:03 pm
My Bike: 2006 1400 Intruder
Location: Calgary Alberta
Contact:

Re: Anyone have any issues with the board?

Post by Night_Wolf »

98VS1400 wrote: Worked fine for me.
Really? Could it be the browser I'm using? I use Chrome. If I click on one of the links to my site(s) it takes me away from here :bang: Even if I click the links in my new sig file it leaves this site :OhNo;
Type @ Ya'll Later
Night_Wolf


Intruder Alert Canada/Night_Wolf's Lair

Alberta Adventure Riders


2006 VS1400 Image 2020 V85TT Image

User avatar
Night_Wolf
Scooter Enthusiast
Posts: 280
Joined: Mon Jan 05, 2015 7:03 pm
My Bike: 2006 1400 Intruder
Location: Calgary Alberta
Contact:

Re: Anyone have any issues with the board?

Post by Night_Wolf »

98VS1400 wrote:I use Chrome also. Every link in this forum should open in a new tab. You might have your settings set to make it open in the same tab.
In the control panel here?
Type @ Ya'll Later
Night_Wolf


Intruder Alert Canada/Night_Wolf's Lair

Alberta Adventure Riders


2006 VS1400 Image 2020 V85TT Image

User avatar
Night_Wolf
Scooter Enthusiast
Posts: 280
Joined: Mon Jan 05, 2015 7:03 pm
My Bike: 2006 1400 Intruder
Location: Calgary Alberta
Contact:

Re: Anyone have any issues with the board?

Post by Night_Wolf »

98VS1400 wrote:
In the control panel here?
No, in Chrome. Watch this:

Ok so I can add an extension to Chrome & that will work for me. The thing is I know of the issue, so I know how to get around it :smoke: . The issue is for those who don't know of a work around, click on a link, and are taken away from this site :bang: which nobody who runs a forum or builds a website wants. On my personal page(s) ALL links automatically open in a New Window/Tab without any interaction from the visitor :cheers:
Type @ Ya'll Later
Night_Wolf


Intruder Alert Canada/Night_Wolf's Lair

Alberta Adventure Riders


2006 VS1400 Image 2020 V85TT Image

User avatar
Jolsen
Joined a 1100cc Club
Posts: 5574
Joined: Tue Sep 16, 2014 12:34 pm
My Bike: ZG-XII and VS-XIV
Moniker: Postmaster
Location: North Pole

Re: Anyone have any issues with the board?

Post by Jolsen »

Works for me.

Sent from my XT1254 using Tapatalk
VS1400 Wiring Diagram INFOWARS
Its not my job to prove myself every time I state facts. Its YOUR job to look it up and find out what I say is true.

NE_FL
Joined a 950cc Club
Posts: 2152
Joined: Mon Dec 15, 2014 11:33 pm
My Bike: VS1400
Location: NE FL

Re: Anyone have any issues with the board?

Post by NE_FL »

Worked OK for me too.

User avatar
Night_Wolf
Scooter Enthusiast
Posts: 280
Joined: Mon Jan 05, 2015 7:03 pm
My Bike: 2006 1400 Intruder
Location: Calgary Alberta
Contact:

Re: Anyone have any issues with the board?

Post by Night_Wolf »

Ok just as long as it works :cheers: Doesn't work for me :bang:
Type @ Ya'll Later
Night_Wolf


Intruder Alert Canada/Night_Wolf's Lair

Alberta Adventure Riders


2006 VS1400 Image 2020 V85TT Image

User avatar
BlacktopTravelr
Joined a 1200cc Club
Posts: 8992
Joined: Mon Sep 22, 2014 5:02 pm
My Bike: Stolen 1-7-15 Returned 1-21-15
Location: Eufaula, Okla

Re: Anyone have any issues with the board?

Post by BlacktopTravelr »

Ok, I clicked on the Night_Wolf's Lair link and was taken to a new tab that showed the http://www.intruderalert.ca/tips_compact_airhorn.htm" onclick="window.open(this.href);return false; site. :Umm:
Image
:putput: (putt putt putt)
90 to 95% of my replies are for my own entertainment :space: :XmasTree:

User avatar
Night_Wolf
Scooter Enthusiast
Posts: 280
Joined: Mon Jan 05, 2015 7:03 pm
My Bike: 2006 1400 Intruder
Location: Calgary Alberta
Contact:

Re: Anyone have any issues with the board?

Post by Night_Wolf »

BlacktopTravelr wrote:Ok, I clicked on the Night_Wolf's Lair link and was taken to a new tab that showed the http://www.intruderalert.ca/tips_compact_airhorn.htm" onclick="window.open(this.href);return false; site. :Umm:
That works :cheers: don't know why it doesn't for me :bang: Since it's my site I'll link directly to the individual pages, otherwise links should go to my front page :smoke:
Type @ Ya'll Later
Night_Wolf


Intruder Alert Canada/Night_Wolf's Lair

Alberta Adventure Riders


2006 VS1400 Image 2020 V85TT Image

User avatar
Fred
WHEELIES R FUN!
Posts: 4527
Joined: Tue Dec 02, 2014 12:08 am
My Bike: VS 1400. Royal Enfield

Re: Anyone have any issues with the board?

Post by Fred »

A very nice chap on the Purple page has Pm'e me about simplifying the intruders wiring system to bare basics. This is something I did some time ago. However Pm' ing him back is a feel a waste considering the time I will have to put into it and I thought I would invite him here where I can prepare a topic on that subject. Or open a topic on IA where I feel it would not be appreciated. Its not something every body wants to do but this man does. Is this poaching and or inappropriate ?

User avatar
Night_Wolf
Scooter Enthusiast
Posts: 280
Joined: Mon Jan 05, 2015 7:03 pm
My Bike: 2006 1400 Intruder
Location: Calgary Alberta
Contact:

Re: Anyone have any issues with the board?

Post by Night_Wolf »

Fred wrote:A very nice chap on the Purple page has Pm'e me about simplifying the intruders wiring system to bare basics. This is something I did some time ago. However Pm' ing him back is a feel a waste considering the time I will have to put into it and I thought I would invite him here where I can prepare a topic on that subject. Or open a topic on IA where I feel it would not be appreciated. Its not something every body wants to do but this man does. Is this poaching and or inappropriate ?
Poaching from the forum may or may not be a big deal; depends upon who finds the poached material here. Poaching from a personal website (like mine :bang: ) should not be done as there can be legal consequences for this sites owners :OhNo;
Type @ Ya'll Later
Night_Wolf


Intruder Alert Canada/Night_Wolf's Lair

Alberta Adventure Riders


2006 VS1400 Image 2020 V85TT Image

User avatar
MadCow
Site Admin
Posts: 6281
Joined: Thu Sep 18, 2014 1:36 pm
My Bike: 2023 Pan America Special

Re: Anyone have any issues with the board?

Post by MadCow »

Night_Wolf wrote:
Fred wrote:A very nice chap on the Purple page has Pm'e me about simplifying the intruders wiring system to bare basics. This is something I did some time ago. However Pm' ing him back is a feel a waste considering the time I will have to put into it and I thought I would invite him here where I can prepare a topic on that subject. Or open a topic on IA where I feel it would not be appreciated. Its not something every body wants to do but this man does. Is this poaching and or inappropriate ?
Poaching from the forum may or may not be a big deal; depends upon who finds the poached material here. Poaching from a personal website (like mine :bang: ) should not be done as there can be legal consequences for this sites owners :OhNo;

Where did you get "poaching material" out of what he said?
-DBTO

User avatar
MadCow
Site Admin
Posts: 6281
Joined: Thu Sep 18, 2014 1:36 pm
My Bike: 2023 Pan America Special

Re: Anyone have any issues with the board?

Post by MadCow »

Fred wrote:A very nice chap on the Purple page has Pm'e me about simplifying the intruders wiring system to bare basics. This is something I did some time ago. However Pm' ing him back is a feel a waste considering the time I will have to put into it and I thought I would invite him here where I can prepare a topic on that subject. Or open a topic on IA where I feel it would not be appreciated. Its not something every body wants to do but this man does. Is this poaching and or inappropriate ?
No, of course it's not poaching...you can invite whoever you want to here...regardless of where they came from.
-DBTO

User avatar
Jolsen
Joined a 1100cc Club
Posts: 5574
Joined: Tue Sep 16, 2014 12:34 pm
My Bike: ZG-XII and VS-XIV
Moniker: Postmaster
Location: North Pole

Re: Anyone have any issues with the board?

Post by Jolsen »

Unless they are from trolls.com lol

Sent from my XT1254 using Tapatalk
VS1400 Wiring Diagram INFOWARS
Its not my job to prove myself every time I state facts. Its YOUR job to look it up and find out what I say is true.

User avatar
Night_Wolf
Scooter Enthusiast
Posts: 280
Joined: Mon Jan 05, 2015 7:03 pm
My Bike: 2006 1400 Intruder
Location: Calgary Alberta
Contact:

Re: Anyone have any issues with the board?

Post by Night_Wolf »

MadCow wrote:
Fred wrote: Is this poaching and or inappropriate ?
Where did you get "poaching material" out of what he said?
This line :OhNo; unless I'm not understanding what type of "poaching" Fred was talking about :bang: which is entirely possible :lmao:
Type @ Ya'll Later
Night_Wolf


Intruder Alert Canada/Night_Wolf's Lair

Alberta Adventure Riders


2006 VS1400 Image 2020 V85TT Image

User avatar
Jolsen
Joined a 1100cc Club
Posts: 5574
Joined: Tue Sep 16, 2014 12:34 pm
My Bike: ZG-XII and VS-XIV
Moniker: Postmaster
Location: North Pole

Re: Anyone have any issues with the board?

Post by Jolsen »

Poached eggs?

Sent from my XT1254 using Tapatalk
VS1400 Wiring Diagram INFOWARS
Its not my job to prove myself every time I state facts. Its YOUR job to look it up and find out what I say is true.

User avatar
MadCow
Site Admin
Posts: 6281
Joined: Thu Sep 18, 2014 1:36 pm
My Bike: 2023 Pan America Special

Re: Anyone have any issues with the board?

Post by MadCow »

Night_Wolf wrote:
MadCow wrote:
Fred wrote: Is this poaching and or inappropriate ?
Where did you get "poaching material" out of what he said?
This line :OhNo; unless I'm not understanding what type of "poaching" Fred was talking about :bang: which is entirely possible :lmao:
He was talking about people, not material.
-DBTO

User avatar
Jolsen
Joined a 1100cc Club
Posts: 5574
Joined: Tue Sep 16, 2014 12:34 pm
My Bike: ZG-XII and VS-XIV
Moniker: Postmaster
Location: North Pole

Re: Anyone have any issues with the board?

Post by Jolsen »

Poached people hmmm

Sent from my XT1254 using Tapatalk
VS1400 Wiring Diagram INFOWARS
Its not my job to prove myself every time I state facts. Its YOUR job to look it up and find out what I say is true.

Post Reply