1999 suzuki intruder vl1500
-
- Tricycles are Cool
- Posts: 5
- Joined: Mon Sep 05, 2022 4:26 pm
- My Bike: 1999 suzuki intruder vl1500 lc
1999 suzuki intruder vl1500
I went to start up my vl1500 the other day and it took longer to fire when it did there sounded like a backfire in the airbox with a wisp of smoke rolling out. I shut it down and when i fired it back up Bike idled real rough but no backfire. Only mods are unbaffled cobra pipes and a jet kit. Where do i even start with this? Any help is appreciated.
- Designer
- Joined a 1200cc Club
- Posts: 17410
- Joined: Tue Sep 16, 2014 8:34 am
- My Bike: Two 1400 Custom Made Choppers
Re: 1999 suzuki intruder vl1500
If you would please,....a little more background would help us help you better.
How long has it been sitting before this happened?
Has this ever happened before?
Were there any symptoms of anything that might be amiss last time you Rode it?
How long has it been sitting before this happened?
![nothing :space:](./images/smilies/SPACE.png)
![nothing :space:](./images/smilies/SPACE.png)
- Herb
- Joined a 1200cc Club
- Posts: 19279
- Joined: Sun Oct 26, 2014 9:28 pm
- My Bike: 1999 1400 intruder
Re: 1999 suzuki intruder vl1500
The first thing I would do is check the airfilter for damage. I have had foam air filters torn apart by a backfire through the carb and they can be sucked into the carb.
I can't seem to win the lottery. I think I have used up all of my good luck riding motorcycles.
- sgtcall
- LICENSE SUSPENDED!
- Posts: 2801
- Joined: Sun Apr 03, 2016 5:59 pm
- My Bike: Triumph Bonneville Speedmaster
- Location: Stranded in New Jersey
Re: 1999 suzuki intruder vl1500
I would take the battery to an auto parts store to have it load tested. Weak battery can cause the sluggish starting.
If you have any type of electrical issue, have your battery load tested before you do anything else. Any auto parts store will test it for free.
-
- Tricycles are Cool
- Posts: 5
- Joined: Mon Sep 05, 2022 4:26 pm
- My Bike: 1999 suzuki intruder vl1500 lc
Re: 1999 suzuki intruder vl1500
It had only sat about a week when it happened. Prior to that the only problem i had was the fuel pump cut out while riding to work but worked fine the next day.
- sgtcall
- LICENSE SUSPENDED!
- Posts: 2801
- Joined: Sun Apr 03, 2016 5:59 pm
- My Bike: Triumph Bonneville Speedmaster
- Location: Stranded in New Jersey
Re: 1999 suzuki intruder vl1500
My guess, Intermittent fuel pump. They start going in and out before they die completely.
If you have any type of electrical issue, have your battery load tested before you do anything else. Any auto parts store will test it for free.
- Designer
- Joined a 1200cc Club
- Posts: 17410
- Joined: Tue Sep 16, 2014 8:34 am
- My Bike: Two 1400 Custom Made Choppers
Re: 1999 suzuki intruder vl1500
Thank you for this info.
![Praise Thee :bow:](./images/smilies/icon_bow.gif)
The more we know, the better will be our help.
And!,.....Lo And Behold?.........just look at what SgtCall just posted !
![i/you did good :ShitGrinandThumb:](./images/smilies/icon_biggthumpup.gif)
- hillsy v2
- Bike out of hock
- Posts: 3045
- Joined: Wed Jul 27, 2022 5:35 pm
- My Bike: Too many to list
Re: 1999 suzuki intruder vl1500
Is that different needles as well? If so these can cut into the needle jet seats and cause erratic fuelling. Carbs lay flat on the LC so the needles oval the seats over time - worse / quicker with aftermarket needles.
Your problem is more than likely the fuel pump but if you get the carbs off at any stage its worth checking the needle jet seats. GMan Industries still does a carb rebuild for the LC and its worth every cent in my opinion.
-
- Tricycles are Cool
- Posts: 5
- Joined: Mon Sep 05, 2022 4:26 pm
- My Bike: 1999 suzuki intruder vl1500 lc
Re: 1999 suzuki intruder vl1500
Thanks all. im going to take a look at it this weekend and see what i find. I believe it is still the stock needles just shimmed. Ill probably rejet with a gman kit. Ive heard pretty good things about them.
- hillsy v2
- Bike out of hock
- Posts: 3045
- Joined: Wed Jul 27, 2022 5:35 pm
- My Bike: Too many to list
Re: 1999 suzuki intruder vl1500
Gary knows his stuff. How many miles? Over 40k and they could probably do with new needle seats anyway. It's not DIY - they are pressed in hence Gary has that service in house.
-
- Tricycles are Cool
- Posts: 5
- Joined: Mon Sep 05, 2022 4:26 pm
- My Bike: 1999 suzuki intruder vl1500 lc
Re: 1999 suzuki intruder vl1500
Its got 22k miles on it now but it would probably be worth getting new needle seats done while I'm at it.
- Designer
- Joined a 1200cc Club
- Posts: 17410
- Joined: Tue Sep 16, 2014 8:34 am
- My Bike: Two 1400 Custom Made Choppers
Re: 1999 suzuki intruder vl1500
Do consider the Expense.
![nothing :space:](./images/smilies/SPACE.png)
My Grandad once told me,...."Don't fix it if it isn't Broken".
- Herb
- Joined a 1200cc Club
- Posts: 19279
- Joined: Sun Oct 26, 2014 9:28 pm
- My Bike: 1999 1400 intruder
Re: 1999 suzuki intruder vl1500
My carbs have around 260,000 miles on them. The only thing I have done to them is sync them at least once a year, patch holes in the diaphrams and drill the vacuum holes in the slides. Still starts and runs good as of 4 days ago.
I can't seem to win the lottery. I think I have used up all of my good luck riding motorcycles.
- Designer
- Joined a 1200cc Club
- Posts: 17410
- Joined: Tue Sep 16, 2014 8:34 am
- My Bike: Two 1400 Custom Made Choppers
Re: 1999 suzuki intruder vl1500
A Good Testimonial.
![nothing :space:](./images/smilies/SPACE.png)
I replaced my Needle Jets at about 65,000 miles because I saw some smoke appear out the Pipes when accelerating in a video one of my Riding Buddys took.
![nothing :space:](./images/smilies/SPACE.png)
But before that,...no need to do it.
![DontKnow :dunno:](./images/smilies/Icon%20dunno.gif)
- hillsy v2
- Bike out of hock
- Posts: 3045
- Joined: Wed Jul 27, 2022 5:35 pm
- My Bike: Too many to list
Re: 1999 suzuki intruder vl1500
This is an LC - carbs are racked togther and both lay down.
Totally different animal to the 1400.
Totally different animal to the 1400.
- Designer
- Joined a 1200cc Club
- Posts: 17410
- Joined: Tue Sep 16, 2014 8:34 am
- My Bike: Two 1400 Custom Made Choppers
Re: 1999 suzuki intruder vl1500
Both Herb and I are aware for this.
However, there Is a "layed down" Carburetor on the 1400 in a nearly identical position to the 1500 paired Carbs (that being: the Front one) .
![nothing :space:](./images/smilies/SPACE.png)
![nothing :space:](./images/smilies/SPACE.png)
Up until about then, there was no need to do so.
![DontKnow :dunno:](./images/smilies/Icon%20dunno.gif)
- hillsy v2
- Bike out of hock
- Posts: 3045
- Joined: Wed Jul 27, 2022 5:35 pm
- My Bike: Too many to list
Re: 1999 suzuki intruder vl1500
You guys are talking about a different bike with TOTALLY different carbs.
The needle jet seats on the LC carbs are a known issue and problematic. Unlike the VS they are pressed in and need special tools to remove / replace. The stock seats will wear out in about 40k miles but if someone has put aftermarket needles in they will saw through the jets a lot faster.
Gary bought this work off Half Crazy from the Purple Board so it's not like it's a once in a blue moon occurrence. The replacement seats he uses are hardened and will not wear out.
Btrey554 - I recommend you get in touch with Gary and have a chat - your carbs may not need the full treatment but he will let you know. I sent my carbs to him from Australia and it was worth every cent. Night and day difference.
The needle jet seats on the LC carbs are a known issue and problematic. Unlike the VS they are pressed in and need special tools to remove / replace. The stock seats will wear out in about 40k miles but if someone has put aftermarket needles in they will saw through the jets a lot faster.
Gary bought this work off Half Crazy from the Purple Board so it's not like it's a once in a blue moon occurrence. The replacement seats he uses are hardened and will not wear out.
Btrey554 - I recommend you get in touch with Gary and have a chat - your carbs may not need the full treatment but he will let you know. I sent my carbs to him from Australia and it was worth every cent. Night and day difference.
- Designer
- Joined a 1200cc Club
- Posts: 17410
- Joined: Tue Sep 16, 2014 8:34 am
- My Bike: Two 1400 Custom Made Choppers
Re: 1999 suzuki intruder vl1500
Pardon,...but the Physics a Needle and Jet interaction while laying down in these Carbs is the same.
That the Needle Jet(s) on the 1500 are pressed in has nothing to do with the rate at which they can get ovaled by the Needle.
And that you mention the 1500 Jets can possible be in need of replacement at 40,000 miles is almost Twice the mileage of what Btrey 554 has. And he reports no symptom of poor MPG at his 22,000 miles.
So it pretty clear he has about 20,000 more Good Miles of Riding before him needing to spend some big $$$ on replacement.
That the Needle Jet(s) on the 1500 are pressed in has nothing to do with the rate at which they can get ovaled by the Needle.
And that you mention the 1500 Jets can possible be in need of replacement at 40,000 miles is almost Twice the mileage of what Btrey 554 has. And he reports no symptom of poor MPG at his 22,000 miles.
So it pretty clear he has about 20,000 more Good Miles of Riding before him needing to spend some big $$$ on replacement.
- Herb
- Joined a 1200cc Club
- Posts: 19279
- Joined: Sun Oct 26, 2014 9:28 pm
- My Bike: 1999 1400 intruder
Re: 1999 suzuki intruder vl1500
If he thinks it is a good idea and is willing to pay for it I see no reason to discourage him. My post is just my experience, for whatever that is worth.Designer wrote: ↑Fri Nov 04, 2022 9:01 pmPardon,...but the Physics a Needle and Jet interaction while laying down in these Carbs is the same.
That the Needle Jet(s) on the 1500 are pressed in has nothing to do with the rate at which they can get ovaled by the Needle.
And that you mention the 1500 Jets can possible be in need of replacement at 40,000 miles is almost Twice the mileage of what Btrey 554 has. And he reports no symptom of poor MPG at his 22,000 miles.
So it pretty clear he has about 20,000 more Good Miles of Riding before him needing to spend some big $$$ on replacement.
I can't seem to win the lottery. I think I have used up all of my good luck riding motorcycles.
- hillsy v2
- Bike out of hock
- Posts: 3045
- Joined: Wed Jul 27, 2022 5:35 pm
- My Bike: Too many to list
Re: 1999 suzuki intruder vl1500
Nothing is "clear" here. We don't know what shape his carbs are in and whether there are aftermarket needles in them.Designer wrote: ↑Fri Nov 04, 2022 9:01 pmPardon,...but the Physics a Needle and Jet interaction while laying down in these Carbs is the same.
That the Needle Jet(s) on the 1500 are pressed in has nothing to do with the rate at which they can get ovaled by the Needle.
And that you mention the 1500 Jets can possible be in need of replacement at 40,000 miles is almost Twice the mileage of what Btrey 554 has. And he reports no symptom of poor MPG at his 22,000 miles.
So it pretty clear he has about 20,000 more Good Miles of Riding before him needing to spend some big $$$ on replacement.
That's why he needs to talk to a REAL expert about them (that's not anyone on this forum, btw).