Intruder dyna 3000
-
- Tricycles are Cool
- Posts: 1
- Joined: Fri Jul 23, 2021 6:56 pm
- My Bike: 94 intruder 1400
Intruder dyna 3000
In have a question about a 94 intruder 1400 i have a 8 pin and a 4 pin cdi I had to buy a dyna 3000 because they don't make this part anymore. I can seem.to.get it to start now I've tried all the settings and nothing has anyone had any luck with these cdi reason in had to replace it that I dropped the seat and ripped it off the back if it lol
- Designer
- Joined a 1200cc Club
- Posts: 17520
- Joined: Tue Sep 16, 2014 8:34 am
- My Bike: Two 1400 Custom Made Choppers
Re: Intruder dyna 3000
I've opened the Stock Transistorized Ignitor ( it's not Capacitive Discharge Ignition as so often thought it is ) and it still worked.
Have you tried using the Stock one that was opened to see it is not damaged?
Have you tried using the Stock one that was opened to see it is not damaged?
-
- Tricycles are Cool
- Posts: 5
- Joined: Wed Apr 26, 2023 7:46 pm
- My Bike: 1987 Vs1400
Re: Intruder dyna 3000
Is there any chance you could post a picture of the internals of the stock igniter for me? I lost a small resistor on the board while trying to find a pair of transistors to replace the burnt out d1071’s and I can’t figure out what the ohm rating was supposed to be on it I have the 1987 igniter
- Designer
- Joined a 1200cc Club
- Posts: 17520
- Joined: Tue Sep 16, 2014 8:34 am
- My Bike: Two 1400 Custom Made Choppers
Re: Intruder dyna 3000
Hi Babz!
Wellsir,...I went through all my Customizing/Chopper pictures and I do not have any of the inside of the TCI.
So sorry.
Wellsir,...I went through all my Customizing/Chopper pictures and I do not have any of the inside of the TCI.
So sorry.