![Funny Last Post :funnylast:](./images/smilies/icon_.gif)
Clutch Change
- sgtcall
- LICENSE SUSPENDED!
- Posts: 2807
- Joined: Sun Apr 03, 2016 5:59 pm
- My Bike: Triumph Bonneville Speedmaster
- Location: Stranded in New Jersey
Re: Clutch Change
![Funny Last Post :funnylast:](./images/smilies/icon_.gif)
If you have any type of electrical issue, have your battery load tested before you do anything else. Any auto parts store will test it for free.
- hillsy v2
- Bike out of hock
- Posts: 3116
- Joined: Wed Jul 27, 2022 5:35 pm
- My Bike: Too many to list
Re: Clutch Change
Yeah - I agree that bleeding would be the first thing to try. Did you take the pressure plate off? If so check you put it back in the right way. Not 100% on the 1400's but a lot of bikes need the plate to go back in the right spot.
- Designer
- Joined a 1200cc Club
- Posts: 17481
- Joined: Tue Sep 16, 2014 8:34 am
- My Bike: Two 1400 Custom Made Choppers
Re: Clutch Change
Yep,...what Herb says.
![nothing :space:](./images/smilies/SPACE.png)
![Wink :wink:](./images/smilies/icon_e_wink.gif)
And,.....just to make sure ALL the Air is out,....here is a technique that is proven effective;
viewtopic.php?f=10&t=4
-
- Joined a 1100cc Club
- Posts: 5509
- Joined: Thu Dec 29, 2016 12:33 pm
- My Bike: VS800
Re: Clutch Change
Yea, need more info...did you pull the discs? the wave washer has a certain orientation, and the thick disc goes on first.
Are the bolts and springs in the proper location? The bolts are different lengths.
- hillsy v2
- Bike out of hock
- Posts: 3116
- Joined: Wed Jul 27, 2022 5:35 pm
- My Bike: Too many to list
Re: Clutch Change
It's more than likely something on the clutch basket side because you shouldn't need to touch the slave or MC if you are just doing the springs.
Nav's right that we need more info. I'm guessing he's taken out the discs to have a look at them seeing he was considering changing them in the first place.
Nav's right that we need more info. I'm guessing he's taken out the discs to have a look at them seeing he was considering changing them in the first place.
-
- Tricycles are Cool
- Posts: 9
- Joined: Fri Jul 07, 2023 9:12 pm
- My Bike: vs 1400 intruder
Re: Clutch Change
I did pull the disks out just for inspection, also sure I got the springs and bolts in correctly, long springs and bolts to the clutch basket and the others to the spring slider. I did manage to get it to shift up into 2nd and 3rd gears just running up and down the street, when it shifts it feels way better. that's why I figure there must be more air in my clutch lines, i would love to find a stock clutch master to put back on the stock levers, I have some cheap amazon masters on atm.
- hillsy v2
- Bike out of hock
- Posts: 3116
- Joined: Wed Jul 27, 2022 5:35 pm
- My Bike: Too many to list
- Designer
- Joined a 1200cc Club
- Posts: 17481
- Joined: Tue Sep 16, 2014 8:34 am
- My Bike: Two 1400 Custom Made Choppers
Re: Clutch Change
Thanks for the updated info!Aaron1085 wrote: ↑Fri Jul 28, 2023 2:18 pmI did pull the disks out just for inspection, also sure I got the springs and bolts in correctly, long springs and bolts to the clutch basket and the others to the spring slider. I did manage to get it to shift up into 2nd and 3rd gears just running up and down the street, when it shifts it feels way better. that's why I figure there must be more air in my clutch lines, i would love to find a stock clutch master to put back on the stock levers, I have some cheap amazon masters on atm.
![nothing :space:](./images/smilies/SPACE.png)
Sometimes when just doing the stronger springs, that can bring out a "weakness" in the Hydraulic System.
We look forwards to what you get after performing the System Bleed like Herb had first mentioned.
-
- Tricycles are Cool
- Posts: 9
- Joined: Fri Jul 07, 2023 9:12 pm
- My Bike: vs 1400 intruder
Re: Clutch Change
I just wanted to thank everyone for all the input. I ended up figuring out my seals in my clutch master were leaking. I had some other older unused masters laying around that had the same bore and stroke. Pulled one apart and switched out the piston and return spring. Pumped it up and it built pressure way quicker than it had previously. She is back on the road. And shifts smooth as butter with the new springs in the clutch.
- sgtcall
- LICENSE SUSPENDED!
- Posts: 2807
- Joined: Sun Apr 03, 2016 5:59 pm
- My Bike: Triumph Bonneville Speedmaster
- Location: Stranded in New Jersey
Re: Clutch Change
![i/you did good :ShitGrinandThumb:](./images/smilies/icon_biggthumpup.gif)
If you have any type of electrical issue, have your battery load tested before you do anything else. Any auto parts store will test it for free.
- Herb
- Joined a 1200cc Club
- Posts: 19343
- Joined: Sun Oct 26, 2014 9:28 pm
- My Bike: 1999 1400 intruder
Re: Clutch Change
Thank you for the update.
I can't seem to win the lottery. I think I have used up all of my good luck riding motorcycles.
- Designer
- Joined a 1200cc Club
- Posts: 17481
- Joined: Tue Sep 16, 2014 8:34 am
- My Bike: Two 1400 Custom Made Choppers
Re: Clutch Change
Now that's Great News!
Good that you had a stash of others to fall back on for free parts. ( that' the right price, eh)
Got any pictures of your Back-On-The-Road Bad Boy?
Good that you had a stash of others to fall back on for free parts. ( that' the right price, eh)
Got any pictures of your Back-On-The-Road Bad Boy?