hi, my handlebar is moving...
i believe the cushions (11-12) are worn, but ebay can't even find the oem codes...
are they standard pieces?
maybe I can find them that are less than 20 years old?
handlebar moving
-
- Practicing Bicycling
- Posts: 40
- Joined: Fri Nov 25, 2022 10:32 am
- My Bike: vs700 86
-
- Joined a 1100cc Club
- Posts: 5518
- Joined: Thu Dec 29, 2016 12:33 pm
- My Bike: VS800
Re: handlebar moving
They are listed as unavailable. NOS would be your best bet.
this place says they have them...worth a phone call
https://www.motosport.com/oem-parts/par ... 6240-38a10
https://partsss.com/en/suzuki/sparepart ... 84657.html
56240-38A10 is the lower
56240-38A01 is the upper
this place says they have them...worth a phone call
https://www.motosport.com/oem-parts/par ... 6240-38a10
https://partsss.com/en/suzuki/sparepart ... 84657.html
56240-38A10 is the lower
56240-38A01 is the upper
- hillsy v2
- Bike out of hock
- Posts: 3170
- Joined: Wed Jul 27, 2022 5:35 pm
- My Bike: Too many to list
Re: handlebar moving
If the rubbers are just compressed you can add some shim material between the two halves or under the end washers. You can use some old inner tube for that.
Also if you think outside the box you might find a stopper of similar size at a hardware store and drill a hole for the bolts.
Also if you think outside the box you might find a stopper of similar size at a hardware store and drill a hole for the bolts.