shocks
-
- Tricycles are Cool
- Posts: 2
- Joined: Sun Apr 23, 2017 1:19 pm
- My Bike: 1992 suzuki intruder 800
shocks
so just got a 92 intruder 800 bought cheap cause im a poor bastard. just took it out today for my first lil ride and it was kinda rough . looked at rear shocks online j and p doesnt have anything less than about 250 and got hits for ones off ebay for about 130 dont know if i trust ones of ebay . question is can my exsisting ones be redone? can the ebay ones be trusted? any help much appricated.
- Blaine
- Passed the Circle Test
- Posts: 349
- Joined: Mon Jan 11, 2016 1:03 pm
- My Bike: 05 S83 07 M50
Re: shocks
I have these on my 1400 & on several other bikes.....Good shocks for the money.
http://www.ebay.ca/itm/Emgo-Black-Chrom ... IS&vxp=mtr
![Image](http://i1099.photobucket.com/albums/g396/Blaine_Curran/18157078_1473877905977449_637237151609057522_n_zpssijfxgor.jpg)
http://www.ebay.ca/itm/Emgo-Black-Chrom ... IS&vxp=mtr
![Image](http://i1099.photobucket.com/albums/g396/Blaine_Curran/18157078_1473877905977449_637237151609057522_n_zpssijfxgor.jpg)
-
- Joined a 1000cc Club
- Posts: 3968
- Joined: Tue Dec 09, 2014 9:58 pm
- My Bike: VS800 Honda Phantom 200
Re: shocks
I got a pair of air shocks from ebay. 12.5" eye to eye. Done around 1500 miles on Thai roads no problems as of yet. They are rated to 300 kg so, just on the limit but the ride is good.
![Image](http://i397.photobucket.com/albums/pp51/lechy_2009/IMG_20170410_131910_zpsxxvdnn56.jpg)
Measure your mounting points, if I remember correctly you will need 3 bushes at 12 mm and 1 lower at 10 mm but check for yourself.
[emoji41]
![Image](http://i397.photobucket.com/albums/pp51/lechy_2009/IMG_20170410_131910_zpsxxvdnn56.jpg)
Measure your mounting points, if I remember correctly you will need 3 bushes at 12 mm and 1 lower at 10 mm but check for yourself.
[emoji41]
Grow old disgracefully young man.
- Blaine
- Passed the Circle Test
- Posts: 349
- Joined: Mon Jan 11, 2016 1:03 pm
- My Bike: 05 S83 07 M50
Re: shocks
Did you check what notch they are at........May just need to bee adjusted up.sodapop83 wrote:so just got a 92 intruder 800 bought cheap cause im a poor bastard. just took it out today for my first lil ride and it was kinda rough . looked at rear shocks online j and p doesnt have anything less than about 250 and got hits for ones off ebay for about 130 dont know if i trust ones of ebay . question is can my exsisting ones be redone? can the ebay ones be trusted? any help much appricated.
![Smile :)](./images/smilies/icon_e_smile.gif)
-
- Tricycles are Cool
- Posts: 2
- Joined: Sun Apr 23, 2017 1:19 pm
- My Bike: 1992 suzuki intruder 800
Re: shocks
the shocks look in need . the plastic im assuming seals on the upper end are weathered and cracked
-
- Joined a 1000cc Club
- Posts: 3968
- Joined: Tue Dec 09, 2014 9:58 pm
- My Bike: VS800 Honda Phantom 200
Re: shocks
I think you are referring to the rubber cushion blocks.
Like Blaine suggested, check the camlocks are on the lowest setting for a softer ride. Also, do not over inflate the tires try 10 psi below manufacturers max and increase until you are happy.
[emoji41]
Like Blaine suggested, check the camlocks are on the lowest setting for a softer ride. Also, do not over inflate the tires try 10 psi below manufacturers max and increase until you are happy.
[emoji41]
Grow old disgracefully young man.
- vanhalenarmy
- Practicing Bicycling
- Posts: 27
- Joined: Sun Oct 09, 2016 4:34 pm
- My Bike: 2002 Suzuki Intruder 1400
- Location: Northern California
Re: shocks
Blaine wrote:I have these on my 1400 & on several other bikes.....Good shocks for the money.
http://www.ebay.ca/itm/Emgo-Black-Chrom ... IS&vxp=mtr
Hey Blaine, which shock length did you go with exactly to get it lowered to the amount in your picture? I'd like to get a set of these Emgo's, just not sure on which length to go with...
If ever time should come, when vain and aspiring men shall possess the highest seats in Government, our country will stand in need of its experienced patriots to prevent its ruin.
- Samuel Adams
- Samuel Adams
- Blaine
- Passed the Circle Test
- Posts: 349
- Joined: Mon Jan 11, 2016 1:03 pm
- My Bike: 05 S83 07 M50
-
- Joined a 1000cc Club
- Posts: 3968
- Joined: Tue Dec 09, 2014 9:58 pm
- My Bike: VS800 Honda Phantom 200
Re: shocks
I used to run 10.5" on my 750, handled like crap. I put on the 12.5" air shocks, night and day difference.
[emoji41]
[emoji41]
Grow old disgracefully young man.
-
- Tricycles are Cool
- Posts: 20
- Joined: Thu Jul 27, 2023 6:20 pm
- My Bike: 2003 Suzuki Intruder VS800
- Location: MA, USA
Re: shocks
Would yours work for a 2003 VS800? And if so, where’d you get yours? I’m real short (5’1”) and only the balls of my feet and toes can touch the ground. I was told replacing the stock 12.5” shocks with 11” ones would get me flat-footed. Do you think that would work?
I put my faith in Youtube and strangers on the internet to solve my problems.
- sgtcall
- LICENSE SUSPENDED!
- Posts: 2815
- Joined: Sun Apr 03, 2016 5:59 pm
- My Bike: Triumph Bonneville Speedmaster
- Location: Stranded in New Jersey
Re: shocks
Fitting the shorter shocks shouldn't be an issue. You could also recover the seat and shave down the foam padding to give you a better seat height.jfaith15 wrote: ↑Thu Jul 27, 2023 7:15 pmWould yours work for a 2003 VS800? And if so, where’d you get yours? I’m real short (5’1”) and only the balls of my feet and toes can touch the ground. I was told replacing the stock 12.5” shocks with 11” ones would get me flat-footed. Do you think that would work?
These covers are well made and easy to install yourself. VS700 VS750 VS800 INTRUDER 2 Piece 1988-2005 Motorcycle Seat Cover You just need a good staple gun with 1/4 inch staples and a hair dryer. The foam can be shaved down and shaped with a razor knife.
If you have any type of electrical issue, have your battery load tested before you do anything else. Any auto parts store will test it for free.
-
- Tricycles are Cool
- Posts: 20
- Joined: Thu Jul 27, 2023 6:20 pm
- My Bike: 2003 Suzuki Intruder VS800
- Location: MA, USA
Re: shocks
Thank you for the link and the quick response! Changing the length of the shocks was my first idea for a fix because it seems like it requires less skill and has a smaller margin for error. However, if I can’t find shorter shocks that fit, then I’ll try altering the seat using that cover.sgtcall wrote: ↑Thu Jul 27, 2023 8:07 pmFitting the shorter shocks shouldn't be an issue. You could also recover the seat and shave down the foam padding to give you a better seat height.jfaith15 wrote: ↑Thu Jul 27, 2023 7:15 pmWould yours work for a 2003 VS800? And if so, where’d you get yours? I’m real short (5’1”) and only the balls of my feet and toes can touch the ground. I was told replacing the stock 12.5” shocks with 11” ones would get me flat-footed. Do you think that would work?
These covers are well made and easy to install yourself. VS700 VS750 VS800 INTRUDER 2 Piece 1988-2005 Motorcycle Seat Cover You just need a good staple gun with 1/4 inch staples and a hair dryer. The foam can be shaved down and shaped with a razor knife.
I put my faith in Youtube and strangers on the internet to solve my problems.
- Herb
- Joined a 1200cc Club
- Posts: 19398
- Joined: Sun Oct 26, 2014 9:28 pm
- My Bike: 1999 1400 intruder
Re: shocks
I found that using an electric carving knife works really well for carving/shaping foam. If you don't have an electric knife the razor knife does a good job.
I can't seem to win the lottery. I think I have used up all of my good luck riding motorcycles.
- sgtcall
- LICENSE SUSPENDED!
- Posts: 2815
- Joined: Sun Apr 03, 2016 5:59 pm
- My Bike: Triumph Bonneville Speedmaster
- Location: Stranded in New Jersey
Re: shocks
Just take your time shaving the seat down and if you make a mistake you can always add new foam. If you warm the razor with the hair dryer it will cut easire. You also use the hair dryer to stretch the seat cover out and get a better fit. Herbs idea would probably work better than the razor knife.jfaith15 wrote: ↑Thu Jul 27, 2023 8:23 pm
Thank you for the link and the quick response! Changing the length of the shocks was my first idea for a fix because it seems like it requires less skill and has a smaller margin for error. However, if I can’t find shorter shocks that fit, then I’ll try altering the seat using that cover.
If you have any type of electrical issue, have your battery load tested before you do anything else. Any auto parts store will test it for free.
- Herb
- Joined a 1200cc Club
- Posts: 19398
- Joined: Sun Oct 26, 2014 9:28 pm
- My Bike: 1999 1400 intruder
Re: shocks
I think it works better but it isn't worth buying one unless you are going to be doing a lot of that kind of thing. I did a couple of seats with the razor knife before a friend gave me an electric knife. (I am a cheap a$$hole)...\sgtcall wrote: ↑Thu Jul 27, 2023 9:05 pmJust take your time shaving the seat down and if you make a mistake you can always add new foam. If you warm the razor with the hair dryer it will cut easire. You also use the hair dryer to stretch the seat cover out and get a better fit. Herbs idea would probably work better than the razor knife.jfaith15 wrote: ↑Thu Jul 27, 2023 8:23 pm
Thank you for the link and the quick response! Changing the length of the shocks was my first idea for a fix because it seems like it requires less skill and has a smaller margin for error. However, if I can’t find shorter shocks that fit, then I’ll try altering the seat using that cover.
I like your idea of using the hair dryer to cut it. I never thought of that, although I did use one to stretch the fabric.
I can't seem to win the lottery. I think I have used up all of my good luck riding motorcycles.
- sgtcall
- LICENSE SUSPENDED!
- Posts: 2815
- Joined: Sun Apr 03, 2016 5:59 pm
- My Bike: Triumph Bonneville Speedmaster
- Location: Stranded in New Jersey
Re: shocks
Electric knifes are always a good investment, Thanksgiving is right around the corner.Herb wrote: ↑Thu Jul 27, 2023 9:10 pmI think it works better but it isn't worth buying one unless you are going to be doing a lot of that kind of thing. I did a couple of seats with the razor knife before a friend gave me an electric knife. (I am a cheap a$$hole)...\sgtcall wrote: ↑Thu Jul 27, 2023 9:05 pmJust take your time shaving the seat down and if you make a mistake you can always add new foam. If you warm the razor with the hair dryer it will cut easire. You also use the hair dryer to stretch the seat cover out and get a better fit. Herbs idea would probably work better than the razor knife.jfaith15 wrote: ↑Thu Jul 27, 2023 8:23 pm
Thank you for the link and the quick response! Changing the length of the shocks was my first idea for a fix because it seems like it requires less skill and has a smaller margin for error. However, if I can’t find shorter shocks that fit, then I’ll try altering the seat using that cover.
I like your idea of using the hair dryer to cut it. I never thought of that, although I did use one to stretch the fabric.
If you have any type of electrical issue, have your battery load tested before you do anything else. Any auto parts store will test it for free.