The "glass" is plastic - I would only remove it if you were going to oven bake the paint on the MC....
or if it's leaking....or you were replacing due to crazing, etc.
A smear of RTV behind the "glass" will prevent leaks.
Motorcycle shops.
- hillsy v2
- Bike out of hock
- Posts: 3206
- Joined: Wed Jul 27, 2022 5:35 pm
- My Bike: Too many to list
-
- Riding on Learners Permit
- Posts: 175
- Joined: Wed May 31, 2023 7:55 pm
- My Bike: VS1400 2002
Re: Motorcycle shops.
Well results that start a new carrer based in the home town takes even more time than been a trucker.
So I dissasemble the MC for the clutch, no scoring, the gasket was placed correctly, and I had no leaks.
So I am going to ask for a used MC and a rebuilding kit.
What is the best rebuilding kit out there?
So I dissasemble the MC for the clutch, no scoring, the gasket was placed correctly, and I had no leaks.
So I am going to ask for a used MC and a rebuilding kit.
What is the best rebuilding kit out there?
More RPMs please
- Designer
- Joined a 1200cc Club
- Posts: 17574
- Joined: Tue Sep 16, 2014 8:34 am
- My Bike: Two 1400 Custom Made Choppers
Re: Motorcycle shops.
azazelakira wrote: ↑Mon May 06, 2024 6:36 pmWell results that start a new carrer based in the home town takes even more time than been a trucker.
So I dissasemble the MC for the clutch, no scoring, the gasket was placed correctly, and I had no leaks.
So I am going to ask for a used MC and a rebuilding kit. What is the best rebuilding kit out there?
Personally,...I would go with OEM.
Have had zero issues with them....can't say the same for the cheapies found elstwhere.
-
- Riding on Learners Permit
- Posts: 175
- Joined: Wed May 31, 2023 7:55 pm
- My Bike: VS1400 2002
Re: Motorcycle shops.
Is this the correct rebuilding kit?
The one I have right now is this one.
The one I have right now is this one.
More RPMs please
- Designer
- Joined a 1200cc Club
- Posts: 17574
- Joined: Tue Sep 16, 2014 8:34 am
- My Bike: Two 1400 Custom Made Choppers
Re: Motorcycle shops.
Yes, the First One with the Suzuki trademark..."S"...is OEM.
The other kit might work. I cannot speak as to it's longevity/quality, but since you have it, why not, eh?
The other kit might work. I cannot speak as to it's longevity/quality, but since you have it, why not, eh?
-
- Riding on Learners Permit
- Posts: 175
- Joined: Wed May 31, 2023 7:55 pm
- My Bike: VS1400 2002
- hillsy v2
- Bike out of hock
- Posts: 3206
- Joined: Wed Jul 27, 2022 5:35 pm
- My Bike: Too many to list
Re: Motorcycle shops.
This site is pretty handy - you can search by model or by part number. It will tell you which bikes the part fits:
https://www.cmsnl.com/
FYI - that rebuild kit fits over 200 models.
https://www.cmsnl.com/
FYI - that rebuild kit fits over 200 models.
-
- Riding on Learners Permit
- Posts: 175
- Joined: Wed May 31, 2023 7:55 pm
- My Bike: VS1400 2002