Intruder vs800 problem SOLVED!

[samcro]

SOLVED! Hello, I have intruder vs800 1999 year. The issue that does not want to start. I changed the starter relay/solenoid. When i press start button the lights blinking as usual but, the solenoid/relay does not click. When I remove the cable of the relay that come from battery and give contact and press start button then i can hear how relay/solenoid clicking. I change the cable from battery to relay but issue still left does anyone had the same problem, the batter show 12.4 voltage? The starter is working when give him 12 voltage its start to run? Anyone any idea where the problem come from

[navigator]

12.4v is actually a weak battery, have it load tested at an auto parts store.
The 800 needs a strong battery.
I suggest the Motobatt.

[sgtcall]

Welcome!
Here are a couple of things to check out.

INTRUDER MANUALS AND INFORMATION
viewtopic.php?f=19&t=14168

POSTING PICTURES ON INTRUDERS ALERT
viewtopic.php?f=19&t=13992

[samcro]

Hello, thanks, I found out the problem. It was the starter, it working but the not enough consumption, probably the some wires have been burnt, from that burn the relay/solenoid, thanks.