Intruder vs800 problem SOLVED!
-
- Tricycles are Cool
- Posts: 2
- Joined: Wed Apr 10, 2024 8:00 am
- My Bike: VS800 Intruder Suzuki
Intruder vs800 problem SOLVED!
SOLVED! Hello, I have intruder vs800 1999 year. The issue that does not want to start. I changed the starter relay/solenoid. When i press start button the lights blinking as usual but, the solenoid/relay does not click. When I remove the cable of the relay that come from battery and give contact and press start button then i can hear how relay/solenoid clicking. I change the cable from battery to relay but issue still left does anyone had the same problem, the batter show 12.4 voltage? The starter is working when give him 12 voltage its start to run? Anyone any idea where the problem come from
-
- Joined a 1100cc Club
- Posts: 5518
- Joined: Thu Dec 29, 2016 12:33 pm
- My Bike: VS800
Re: Intruder vs800 problem
12.4v is actually a weak battery, have it load tested at an auto parts store.
The 800 needs a strong battery.
I suggest the Motobatt.
The 800 needs a strong battery.
I suggest the Motobatt.
- sgtcall
- LICENSE SUSPENDED!
- Posts: 2810
- Joined: Sun Apr 03, 2016 5:59 pm
- My Bike: Triumph Bonneville Speedmaster
- Location: Stranded in New Jersey
Re: Intruder vs800 problem
Welcome!
Here are a couple of things to check out.
INTRUDER MANUALS AND INFORMATION
viewtopic.php?f=19&t=14168
POSTING PICTURES ON INTRUDERS ALERT
viewtopic.php?f=19&t=13992
If you have any type of electrical issue, have your battery load tested before you do anything else. Any auto parts store will test it for free.
-
- Tricycles are Cool
- Posts: 2
- Joined: Wed Apr 10, 2024 8:00 am
- My Bike: VS800 Intruder Suzuki
Re: Intruder vs800 problem
Hello, thanks, I found out the problem. It was the starter, it working but the not enough consumption, probably the some wires have been burnt, from that burn the relay/solenoid, thanks.