I’ve been trying to find the cheapest and simplest way to get my feet more solidly on the ground when at standstill, and adjusting the preload has come up a few times. I think I get the basic idea of what preload is, but I don’t know what mine is set to, or if adjusting it to the lowest setting would lower the seat height enough.
I think I need it an inch lower. The seat height on the Rebel 250 was 26.6” and my feet were nearly completely flat. I think I need it an inch lower, since the VS800 seat height is 27.2”.
Standing on the balls of my feet on this bike definitely is not ideal or safe, but I don’t have $300+ to drop on 11” or 11.5” Progressive shocks. I’m also not confident enough to shave the foam of the stock seat myself and unfortunately, I don’t know anywhere that could do it for me (probably don’t have the money either).
How does preload work?
-
- Tricycles are Cool
- Posts: 20
- Joined: Thu Jul 27, 2023 6:20 pm
- My Bike: 2003 Suzuki Intruder VS800
- Location: MA, USA
How does preload work?
I put my faith in Youtube and strangers on the internet to solve my problems.
- sgtcall
- LICENSE SUSPENDED!
- Posts: 2815
- Joined: Sun Apr 03, 2016 5:59 pm
- My Bike: Triumph Bonneville Speedmaster
- Location: Stranded in New Jersey
Re: How does preload work?
Preload is the ammount of compresion to the shocks when you sit on the seat. Your shocks should be preload adjustable but this is not really going to fix your issue. You could add shorter shocks but that would be expensive.jfaith15 wrote: ↑Fri Sep 29, 2023 1:21 pmI’ve been trying to find the cheapest and simplest way to get my feet more solidly on the ground when at standstill, and adjusting the preload has come up a few times. I think I get the basic idea of what preload is, but I don’t know what mine is set to, or if adjusting it to the lowest setting would lower the seat height enough.
I think I need it an inch lower. The seat height on the Rebel 250 was 26.6” and my feet were nearly completely flat. I think I need it an inch lower, since the VS800 seat height is 27.2”.
Standing on the balls of my feet on this bike definitely is not ideal or safe, but I don’t have $300+ to drop on 11” or 11.5” Progressive shocks. I’m also not confident enough to shave the foam of the stock seat myself and unfortunately, I don’t know anywhere that could do it for me (probably don’t have the money either).
The easy and cheap way is to adjust the seat. Order a seat cover from ebay for $40. (https://www.ebay.com/itm/224034709598?f ... R5zOxbHcYg)
Use a razor knife to carve down the foam in the seat an inch or 2 then sit on it to see if it works for you. Go a little further than perfect. Using rubber cement add a thin layer of foam to the top to smooth it out then put the new cover on. Heat the cover with a hair dryer as you streach it on to make it easier to get in place and staple it on with 1/4 staples. It is actually easy to do and only takes a couple of hours.
Herb mentioned using an electric carving knife to trim the seat and that sounds like a great idea if you have one on hand.
You can't really mess this up and if you do just refill the mistake with new foam.
If you have any type of electrical issue, have your battery load tested before you do anything else. Any auto parts store will test it for free.
- sgtcall
- LICENSE SUSPENDED!
- Posts: 2815
- Joined: Sun Apr 03, 2016 5:59 pm
- My Bike: Triumph Bonneville Speedmaster
- Location: Stranded in New Jersey
Re: How does preload work?
I also think the ebay seat cover looks much better than the stock cover.
If you have any type of electrical issue, have your battery load tested before you do anything else. Any auto parts store will test it for free.
- hillsy v2
- Bike out of hock
- Posts: 3206
- Joined: Wed Jul 27, 2022 5:35 pm
- My Bike: Too many to list
Re: How does preload work?
Guys used to use 2nd hand Sportster shocks on XJs to lower them - cheaper option than new and would probably bolt straight on to your VS.
-
- Tricycles are Cool
- Posts: 20
- Joined: Thu Jul 27, 2023 6:20 pm
- My Bike: 2003 Suzuki Intruder VS800
- Location: MA, USA
Re: How does preload work?
thanks! will it make it more uncomfortable to sit on for long rides if it has less foam?sgtcall wrote: ↑Fri Sep 29, 2023 3:48 pmPreload is the ammount of compresion to the shocks when you sit on the seat. Your shocks should be preload adjustable but this is not really going to fix your issue. You could add shorter shocks but that would be expensive.jfaith15 wrote: ↑Fri Sep 29, 2023 1:21 pmI’ve been trying to find the cheapest and simplest way to get my feet more solidly on the ground when at standstill, and adjusting the preload has come up a few times. I think I get the basic idea of what preload is, but I don’t know what mine is set to, or if adjusting it to the lowest setting would lower the seat height enough.
I think I need it an inch lower. The seat height on the Rebel 250 was 26.6” and my feet were nearly completely flat. I think I need it an inch lower, since the VS800 seat height is 27.2”.
Standing on the balls of my feet on this bike definitely is not ideal or safe, but I don’t have $300+ to drop on 11” or 11.5” Progressive shocks. I’m also not confident enough to shave the foam of the stock seat myself and unfortunately, I don’t know anywhere that could do it for me (probably don’t have the money either).
The easy and cheap way is to adjust the seat. Order a seat cover from ebay for $40. (https://www.ebay.com/itm/224034709598?f ... R5zOxbHcYg)
Use a razor knife to carve down the foam in the seat an inch or 2 then sit on it to see if it works for you. Go a little further than perfect. Using rubber cement add a thin layer of foam to the top to smooth it out then put the new cover on. Heat the cover with a hair dryer as you streach it on to make it easier to get in place and staple it on with 1/4 staples. It is actually easy to do and only takes a couple of hours.
Herb mentioned using an electric carving knife to trim the seat and that sounds like a great idea if you have one on hand.
You can't really mess this up and if you do just refill the mistake with new foam.
I put my faith in Youtube and strangers on the internet to solve my problems.
-
- Joined a 1100cc Club
- Posts: 5521
- Joined: Thu Dec 29, 2016 12:33 pm
- My Bike: VS800
Re: How does preload work?
Agreed, the shock length doesn't change with preload, it will not lower the bike enough.
You may however get a softer ride.
To check your preload, look up into the bottom of the shock, you will see a series of 5 steps. Rotating the bottom chrome cover of the shock will change the setting. Make sure both sides of the bike are on the same setting.
You may however get a softer ride.
To check your preload, look up into the bottom of the shock, you will see a series of 5 steps. Rotating the bottom chrome cover of the shock will change the setting. Make sure both sides of the bike are on the same setting.
-
- Tricycles are Cool
- Posts: 20
- Joined: Thu Jul 27, 2023 6:20 pm
- My Bike: 2003 Suzuki Intruder VS800
- Location: MA, USA
Re: How does preload work?
i’ve heard about people putting sportster parts on vs800s and i’ll look for more info on it but i’m worried they’ll cost a decent amount and not fit. anyone else know if sportster shocks will fit?
I put my faith in Youtube and strangers on the internet to solve my problems.
-
- Joined a 1100cc Club
- Posts: 5521
- Joined: Thu Dec 29, 2016 12:33 pm
- My Bike: VS800
Re: How does preload work?
Measure the eye diameter, I forget offhand what they are. Also measure the length eye to eye. IIRC stock VS800 shocks are 12.5"
Progressive shocks are supplied with steel bushings to adapt to different diameters, You can also get them at a hardware store.
IIRC the lower right bolt is a different diameter than the top studs and lower left stud.
Replace the shocks one at a time, don't pull both off unless you have a jack under the bike.
- sgtcall
- LICENSE SUSPENDED!
- Posts: 2815
- Joined: Sun Apr 03, 2016 5:59 pm
- My Bike: Triumph Bonneville Speedmaster
- Location: Stranded in New Jersey
Re: How does preload work?
No it will be fine. In fact to much padding can be just as uncomfortable as to little.
You could do something like this.
You could do something like this.
If you have any type of electrical issue, have your battery load tested before you do anything else. Any auto parts store will test it for free.