Source for turn signal rubber mount?
-
- Learning My Moped
- Posts: 109
- Joined: Wed Mar 09, 2016 4:55 pm
- My Bike: The Legendary Classic
Source for turn signal rubber mount?
Does anyone know where I can find just the rubber mount for the rear turn signals? Both of mine are cracked (currently held together with gorilla tape) and the stealership only sells the whole assembly.
- enforcer
- Joined a 650cc Club
- Posts: 1138
- Joined: Wed Feb 03, 2016 7:29 pm
- My Bike: 03 HD FLHT 01 Yamaha XVS650
Re: Source for turn signal rubber mount?
I have a few laying around. They look the same. You can have them for the cost of shipping. Shouldn't be much since, IIRC, you're down in KC?
Current rides: 03 HD FLHT & 01 Yamaha XVS650(BIP)
Former: 87 Suzuki VS700, 94 BMW K1100LT & 91 Honda CB250
I don't want to own them all, just ride them all.
Former: 87 Suzuki VS700, 94 BMW K1100LT & 91 Honda CB250
I don't want to own them all, just ride them all.
- enforcer
- Joined a 650cc Club
- Posts: 1138
- Joined: Wed Feb 03, 2016 7:29 pm
- My Bike: 03 HD FLHT 01 Yamaha XVS650
Re: Source for turn signal rubber mount?
And I just looked, and they're not the same part number but they look exactly alike. I suspect the part number is different because of the connector for the receptacle.
Current rides: 03 HD FLHT & 01 Yamaha XVS650(BIP)
Former: 87 Suzuki VS700, 94 BMW K1100LT & 91 Honda CB250
I don't want to own them all, just ride them all.
Former: 87 Suzuki VS700, 94 BMW K1100LT & 91 Honda CB250
I don't want to own them all, just ride them all.
-
- Learning My Moped
- Posts: 109
- Joined: Wed Mar 09, 2016 4:55 pm
- My Bike: The Legendary Classic
Re: Source for turn signal rubber mount?
That would be awesome! I can paypal you, or email you a priority mail label - whatever would be easier.
- enforcer
- Joined a 650cc Club
- Posts: 1138
- Joined: Wed Feb 03, 2016 7:29 pm
- My Bike: 03 HD FLHT 01 Yamaha XVS650
Re: Source for turn signal rubber mount?
Let me take a pic when I get home so I can show you exactly what they look like. I still have all four, I can remove the rubbers and throw them in an envelope, since I have some errands to run tomorrow morning anyway. Just shoot me an address.Joe A wrote:That would be awesome! I can paypal you, or email you a priority mail label - whatever would be easier.
Current rides: 03 HD FLHT & 01 Yamaha XVS650(BIP)
Former: 87 Suzuki VS700, 94 BMW K1100LT & 91 Honda CB250
I don't want to own them all, just ride them all.
Former: 87 Suzuki VS700, 94 BMW K1100LT & 91 Honda CB250
I don't want to own them all, just ride them all.
- enforcer
- Joined a 650cc Club
- Posts: 1138
- Joined: Wed Feb 03, 2016 7:29 pm
- My Bike: 03 HD FLHT 01 Yamaha XVS650
Re: Source for turn signal rubber mount?
Here's what they look like.
That's what you're looking for, correct?
That's what you're looking for, correct?
Current rides: 03 HD FLHT & 01 Yamaha XVS650(BIP)
Former: 87 Suzuki VS700, 94 BMW K1100LT & 91 Honda CB250
I don't want to own them all, just ride them all.
Former: 87 Suzuki VS700, 94 BMW K1100LT & 91 Honda CB250
I don't want to own them all, just ride them all.
-
- Learning My Moped
- Posts: 109
- Joined: Wed Mar 09, 2016 4:55 pm
- My Bike: The Legendary Classic
Re: Source for turn signal rubber mount?
That's them for sure! I'll PM you my address. let me know what you need to cover postage.
Thanks!
Thanks!
- enforcer
- Joined a 650cc Club
- Posts: 1138
- Joined: Wed Feb 03, 2016 7:29 pm
- My Bike: 03 HD FLHT 01 Yamaha XVS650
Re: Source for turn signal rubber mount?
PM sent.Joe A wrote:That's them for sure! I'll PM you my address. let me know what you need to cover postage.
Thanks!
Current rides: 03 HD FLHT & 01 Yamaha XVS650(BIP)
Former: 87 Suzuki VS700, 94 BMW K1100LT & 91 Honda CB250
I don't want to own them all, just ride them all.
Former: 87 Suzuki VS700, 94 BMW K1100LT & 91 Honda CB250
I don't want to own them all, just ride them all.
-
- Learning My Moped
- Posts: 109
- Joined: Wed Mar 09, 2016 4:55 pm
- My Bike: The Legendary Classic
Re: Source for turn signal rubber mount?
Just got them today, thanks!
Now, I'm trying to figure out how to replace the damn things without cutting and splicing the wires. I don't see where they disconnect, unless it's the rubber boot where the wires go into the lamp housing.
Now, I'm trying to figure out how to replace the damn things without cutting and splicing the wires. I don't see where they disconnect, unless it's the rubber boot where the wires go into the lamp housing.
-
- Learning My Moped
- Posts: 109
- Joined: Wed Mar 09, 2016 4:55 pm
- My Bike: The Legendary Classic
Re: Source for turn signal rubber mount?
Okay. I'm just thick. You've gotta take the mounting bracket off.
I find it curious that, instead of drilling and tapping one extra hole so that these could be used on either side, they make suzuki dealers stock a dedicated left and right version.
I find it curious that, instead of drilling and tapping one extra hole so that these could be used on either side, they make suzuki dealers stock a dedicated left and right version.
- enforcer
- Joined a 650cc Club
- Posts: 1138
- Joined: Wed Feb 03, 2016 7:29 pm
- My Bike: 03 HD FLHT 01 Yamaha XVS650
Re: Source for turn signal rubber mount?
Tell me about it.Joe A wrote:Okay. I'm just thick. You've gotta take the mounting bracket off.
I find it curious that, instead of drilling and tapping one extra hole so that these could be used on either side, they make suzuki dealers stock a dedicated left and right version.
In order to remove my stock signals it was one screw a piece at the signals and unplug under the seat and headlight housing.
I'm just curious to make sure they fit. [emoji106]
Current rides: 03 HD FLHT & 01 Yamaha XVS650(BIP)
Former: 87 Suzuki VS700, 94 BMW K1100LT & 91 Honda CB250
I don't want to own them all, just ride them all.
Former: 87 Suzuki VS700, 94 BMW K1100LT & 91 Honda CB250
I don't want to own them all, just ride them all.
-
- Learning My Moped
- Posts: 109
- Joined: Wed Mar 09, 2016 4:55 pm
- My Bike: The Legendary Classic
Re: Source for turn signal rubber mount?
Yep, they fit great, thanks!