Does anybody have some good photos to go along with the carb sync procedure? I haven't done that in a few years and was hoping to look at some photos to go along with the write up in the tech articles.
I contacted 98vs1400, he has an excellent write up, but I haven't heard back.
Any help is appreciated.
Carb sync photos
-
- Got My M1 License!
- Posts: 433
- Joined: Wed Feb 24, 2016 2:54 pm
- My Bike: 1992 Intruder 1400
-
- Joined a 1100cc Club
- Posts: 5539
- Joined: Thu Dec 29, 2016 12:33 pm
- My Bike: VS800
Re: Carb sync photos
Perhaps Keith can move these to the LOCKED carb sync thread.
-
- Got My M1 License!
- Posts: 433
- Joined: Wed Feb 24, 2016 2:54 pm
- My Bike: 1992 Intruder 1400
Re: Carb sync photos
Thanks so much for all the photos. I really appreciate your help.
-
- Got My M1 License!
- Posts: 433
- Joined: Wed Feb 24, 2016 2:54 pm
- My Bike: 1992 Intruder 1400
Re: Carb sync photos
For the life of me, I don't remember removing the boost sensor hose. That is where you hook up the right vacuum hose?
-
- FLAT TIRE!
- Posts: 3972
- Joined: Tue Dec 09, 2014 9:58 pm
- My Bike: VS800 Honda Phantom 200
Re: Carb sync photos
Vac hose is the boost sensor, same as the vacuum advance on older cars.
A video here should help: http://intruders-alert.com/viewtopic.php?f=32&t=4139
[emoji41]
A video here should help: http://intruders-alert.com/viewtopic.php?f=32&t=4139
[emoji41]
Grow old disgracefully young man.
- Rick
- Practicing Bicycling
- Posts: 36
- Joined: Sun May 28, 2017 11:41 pm
- My Bike: 2000 VS1400
Re: Carb sync photos
Thanks for the info. Very simple.