What causes the issue with not starting.. The not returning to resting place or?Designer wrote: ↑Mon Mar 07, 2022 2:12 pmHey! So good to hear from you again. Thanks for the Update.
About your Decomp system....I had once some issues,...so I gave mine a "tune up". I lubed the Cables with a Liquid Graphite Lubricant that is used for Mountain Bike Cables. It goes in liquid,...the liquid dries,..and leaves behind Dried Graphite Lubricant.(pretty slippery stuff) A good choice for these cables, kinda-cuz Greases tend to attract dirt and hold it.
And,...I took off the Decomp Return Springs at each Cylinder Head Decomp Lever.....and flexed them "out" to so when installed, they created a bit more "closing power". The power of the Decomp Solenoid is MORE THAN enough to overcome the small amount if increased closing effort the "flexed" Return Springs now created. Never had any problems in 14 years now.
My offer still stands for your Carb. And,....for you?.....NO CHARGE!!
This bike will click, and the lever will move but not fully return and every few or several hits of the starter button will result in it turning motor to try starting.. Then go back to click and not crank.. Repeat.
And the stock pump is leaking.. Theirs no fix for that right? Lol.